{"id":7869,"date":"2020-03-23T08:25:13","date_gmt":"2020-03-23T15:25:13","guid":{"rendered":"http:\/\/exhaustnotes.us\/blog\/?p=7869"},"modified":"2020-03-23T12:12:52","modified_gmt":"2020-03-23T19:12:52","slug":"developing-a-henry-45-70-load-part-1","status":"publish","type":"post","link":"https:\/\/exhaustnotes.us\/blog\/index.php\/2020\/03\/23\/developing-a-henry-45-70-load-part-1\/","title":{"rendered":"Developing a Henry .45 70 Load: Part 1"},"content":{"rendered":"
\"\"
The new Henry Single Shot. Mine has exceptionally fancy walnut. I am a soft touch when fancy walnut is involved.<\/figcaption><\/figure>\n

I’m about a week away from having sufficiently cooled (at least in the Peoples Republik of Kalifornia’s eyes), which is another way of saying I have 7 days left until my 10-day waiting period is over, and then I’ll be able to pick up my new Henry .45 70 Single Shot<\/a>.\u00a0 (“Single Shot” is capitalized because it’s a proper noun; it’s Henry’s official name for this rifle.)<\/p>\n

\"\"
Another view showing the entire Henry Single Shot rifle. I’ll get better photos when I get to the range; I shot these photos at the dealer.<\/figcaption><\/figure>\n

I am loading a series of cartridges to test for accuracy in the new Henry and I’m going to tell you about the loads, but before I get into that I want to tell you about the three levels of reloads you find in the .45 70 reloading manuals.\u00a0 I’ll post about the different loads (and reloading those rounds) in the next blog.<\/p>\n

\"\"
A Sense of Scale: A .22 Long Rifle cartridge, a 405-grain Missouri cast .45 70 bullet (just the bullet is bigger in both length and diameter than an entire .22 cartridge), and a reloaded .45 70 cartridge.<\/figcaption><\/figure>\n

.45 70 History<\/h2>\n

I’ve been a student of the .45 70 for close to 50 years, and the cartridge is nearly 150 years old.\u00a0 One of the best sources of information on the early .45 70 rifles is Jack Behn’s touchstone reference shown below.<\/p>\n

\"\"
One of the best references on early .45 70 rifles is Jack Behn’s excellent 1956 book. It was published by the Gun Room Press, an imprint owned by the now defunct Rutgers Gun Store. When I picked up my 1973 Colin D. MacManus 1911 .45 auto, it was from the Rutgers Gun Store in Highland Park, New Jersey.<\/figcaption><\/figure>\n

At the end of the Civil War, the Army knew it needed a breechloading rifle (one that loaded from the rear with metallic cartridges).\u00a0 This resulted in development of the 1873 Springfield rifle and the .45 70 500 cartridge, so designated because it fired a 500-grain, .458-inch diameter lead cartridge propelled by 70 grains of black powder.\u00a0 That was later changed to a 405-grain lead cartridge because soldiers complained that recoil with the 500-grain projectile was excessive.<\/p>\n

\"\"
An 1873 Trapdoor Springfield rifle.<\/figcaption><\/figure>\n

That .45 70 Trapdoor Springfield remained in service from 1873 through the Spanish American War and our wars against the Plains Indians.\u00a0 It was also the rifle most frequently used by buffalo hunters to nearly exterminate the American bison, which was really little more than an extension of the war against the Indians (it’s not widely known, but the dominant reason the U.S. Government encouraged eradication of the American bison was because it was the principal source of food, shelter, and clothing for the Indians).<\/p>\n

\"\"
The Trapdoor action.\u00a0 New in its day, it is antiquated today.\u00a0 It is a weaker action than are those used in modern single shot and lever action rifles, and it therefore is loaded to lower chamber pressures.<\/figcaption><\/figure>\n

Trapdoor Springfield .45 70 Loads<\/h2>\n

The “Trapdoor” designation for the 1873 Springfield refers to the action design. \u00a0 The Springfield’s action had a hinged element that rotated forward to allow loading a cartridge, which was then closed and locked in place prior to firing a round. \u00a0 It was state of the art in\u00a0 1873, but it was inherently weak and limited the pressures to which ammunition could be loaded.\u00a0 But it was enough.\u00a0 The Springfield action could withstand pressures up to around 17,000 psi, sufficient to launch a 405-grain projectile at velocities a little north of 1400 feet per second.\u00a0 It was more than enough to kill a man, and in fact, it was enough to kill a buffalo.<\/p>\n

Winchester and Marlin .45 70 Loads<\/h2>\n

The .45 70 cartridge had a lot going for it, and in 1886, Winchester introduced a .45 70 lever action repeater (their Model 1886).\u00a0 Marlin had previously introduced a .45 70 lever action repeater in 1881.\u00a0 The Winchester and Marlin rifles had two advantages:\u00a0 They could fire repeatedly by operating the lever action and squeezing the trigger, and the lever gun actions were stronger (so they could be loaded to higher pressures with resulting higher velocities).\u00a0 I don’t know that any of the ammo companies loaded the cartridge to the higher pressures the Winchester and Marlin rifles could handle back in those days (probably out of a fear that the ammo might be used in the weaker Springfield action), but folks who reload today and who have either a Marlin or a Winchester can load their ammunition to the higher levels allowed by the lever gun receivers.<\/p>\n

The reloading manuals show that the Model 1895 Marlin and Model 1886 Winchester lever actions can handle chamber pressures in the 27,000 psi range. \u00a0 That’s enough to drive a 405-grain bullet out at about 1700 feet per second.\u00a0 That’s a smoking hot load.<\/p>\n

\"\"
This is a Chiappa reproduction of the 1886 Winchester rifle, chambered in .45 70. This is a lever action rifle.<\/figcaption><\/figure>\n
\"\"
The 1886 Chiappa reproduction. The curved metal buttplate is a faithful reproduction of the original Winchester design, and it is punishing when the hammer drops. Nice wood, huh?<\/figcaption><\/figure>\n
\"\"
A modern Marlin 1895. When I saw this one on the rack, I knew I had to have it. I’ve owned the rifle about 25 years now. It’s very accurate, and it regularly shoots into an inch with open sights at 50 yards.<\/figcaption><\/figure>\n

Ruger No. 1 and No. 3 .45 70 Loads<\/h2>\n

The next step in the .45 70 evolutionary chain?\u00a0 That would be the single shot rifles offered by Ruger starting in the 1970s.\u00a0 Ruger had two:\u00a0 Their No. 1 rifle and the No. 3.\u00a0 Both use the same action, and it’s strong.\u00a0 In the Ruger rifles, you can load .45 70 ammunition to nearly the same velocities and the same pressures as a .458 Winchester Magnum, which is to say, crazy levels (at least in terms of recoil). \u00a0 Ruger rifles chambered in .45 70 can handle pressures approaching 40,000 psi, with 405-grain bullet velocities north of 2,000 feet per second.\u00a0 I’ve done this.\u00a0 It’s no fun.<\/p>\n

\"\"
A Ruger No. 1 falling block rifle. This is the rare 26-inch barreled version with figured Circassian walnut. Ruger only made a limited number of these variants and most of them have very plain wood. It’s pretty, but the Marlin shown above is more accurate.<\/figcaption><\/figure>\n

.45 70 Loads:\u00a0 The Bottom Line<\/h2>\n

The upshot of all this?\u00a0 There are three levels to which you can reload .45 70 ammunition:\u00a0 The Trapdoor Springfield level, the 1886 Winchester\/Marlin level, and the Ruger level.\u00a0 When you see this in a reloading manual, you’ll see three sets of reloading data, designated separately as explained in this blog.<\/p>\n

What does all this mean in the real world?\u00a0 Your mileage may vary, but for me, I never venture into the Marlin\/Winchester and Ruger .45 70 reloading levels. \u00a0 There’s just too much recoil, and you don’t need to go there for accuracy.\u00a0 I would argue further that you don’t need to go there for lethality (the .45 70 in 1873 Trapdoor Springfields killed a lot of buffalo).\u00a0 I stick to the Springfield levels for all of my rifles (even though I could go higher), and that’s how I’m going to load for the new Henry<\/a> rifle, too.<\/p>\n

\n

More Tales of the Gun here<\/a>, including detailed info on each of the rifles shown above!<\/p>\n","protected":false},"excerpt":{"rendered":"

I’m about a week away from having sufficiently cooled (at least in the Peoples Republik of Kalifornia’s eyes), which is another way of saying I have 7 days left until my 10-day waiting period is over, and then I’ll be able to pick up my new Henry .45 70 Single Shot.\u00a0 (“Single Shot” is capitalized … Continue reading “Developing a Henry .45 70 Load: Part 1”<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":true,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":""},"categories":[84],"tags":[1094,270,1096,1077,271,112,811,1095],"class_list":["post-7869","post","type-post","status-publish","format-standard","hentry","category-guns","tag-1094","tag-45-70","tag-chiappa","tag-henry","tag-marlin","tag-ruger","tag-winchester","tag-winchester-1886"],"jetpack_featured_media_url":"","jetpack_sharing_enabled":true,"post_mailing_queue_ids":[],"_links":{"self":[{"href":"https:\/\/exhaustnotes.us\/blog\/index.php\/wp-json\/wp\/v2\/posts\/7869","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/exhaustnotes.us\/blog\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/exhaustnotes.us\/blog\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/exhaustnotes.us\/blog\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/exhaustnotes.us\/blog\/index.php\/wp-json\/wp\/v2\/comments?post=7869"}],"version-history":[{"count":19,"href":"https:\/\/exhaustnotes.us\/blog\/index.php\/wp-json\/wp\/v2\/posts\/7869\/revisions"}],"predecessor-version":[{"id":7904,"href":"https:\/\/exhaustnotes.us\/blog\/index.php\/wp-json\/wp\/v2\/posts\/7869\/revisions\/7904"}],"wp:attachment":[{"href":"https:\/\/exhaustnotes.us\/blog\/index.php\/wp-json\/wp\/v2\/media?parent=7869"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/exhaustnotes.us\/blog\/index.php\/wp-json\/wp\/v2\/categories?post=7869"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/exhaustnotes.us\/blog\/index.php\/wp-json\/wp\/v2\/tags?post=7869"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}