British Motorcycle Gear

The Rimfire Series: A tale of two Springfields…

Good buddy Greg admiring my M1922 Springfield on the range this past weekend. This rifle is about as old as Greg is, but it looks like it left the factory last week. It’s super collectible.

So, what’s this all about?  A tale of two Springfields?  Well, the topic is Springfield rifles, and specifically, the 1903 Springfield and its variants.  I own two, and I think they are two of the finest firearms ever made. One is a 1903A1 with a scant stock (more on that in a bit).  It’s a recent acquisition of a century-old rifle, and mine is essentially in as-new condition.  It was  gunsmithed from selected components so it’s not an original rifle, but I don’t care. I bought it to shoot it, and that’s what I’m doing.  My other Springfield is an M1922, a special number chambered in .22 Long Rifle. It’s a magnificent rifle, it’s one I inherited from my father, and it is an amazing firearm. It’s in pristine condition, and boy oh boy, can it shoot!

The challenge here is to keep this blog short. There’s just so much to tell when the topic is the 1903 Springfield rifle and its variants. I’ll do my best to keep it manageable.

The M1903A1 Springfield, chambered in the mighty .30 06 cartridge.
The M1922 Springfield, which shoots the much smaller .22 Long Rifle cartridge.

The Reader’s Digest version of the story goes like this…although we won the Spanish American War (and its Battle of San Juan Hill probably put Teddy Roosevelt in the White House), we very nearly got our butts kicked by the Spaniards.  We were armed with antiquated, big-bore, rainbow-trajectory, single-shot rifles.  The Spaniards had modern 7mm Mauser bolt action rifles, which were flatter shooting, faster (both in terms of reloading time and bullet velocity), and far more accurate. It was a dicey victory for us, and shortly after, the US Army incorporated the 1898 Krag rifle.  We had to keep up with the Spanish Joneses.

While the Krag was a bolt-action rifle, it was not without problems, and we quickly developed a new rifle based on a modernized Mauser action initially chambered in a round called the .30 03.  It fired a .308-inch diameter bullet (which is where the .30 part of the .30 03 name came from) and it was adopted in 1903 (which is where the 03 came from).  We then improved the cartridge a bit in 1906 and it became the .30 06, or simply, the ’06.  The ’06 is one of the world’s premier hunting cartridges, and many folks think is the best all-around cartridge on the planet.  I’m one of them, but I digress. One more photo, and then back to the story.

A modern Winchester Model 70, chambered in the 102-year-old .30 06 cartridge. That wild boar, late of Arizona, fed us for a year!

Like I said, the original Springfield rifle was cambered for the .30 03 and the rifle was designed as the Model 1903.  The .30 03 only lasted a short time and all of the 1903 rifles chambered for it were recut for the improved .30 06, but the rifle’s name remained the Model 1903. These early ones were cool, with straight grip stocks and elegant (but complex) rear sights. Then the rifle got a pistol grip stock, which I think looked cooler, and they became the 1903A1 rifles. Then they were made with stocks that were supposed to be straight grip stocks, but the Army wanted the pistol grip and the arsenal’s walnut blanks did not have enough meat to allow for a full pistol grip. The solution was to get as close as possible to a pistol grip from a straight grip walnut blank, which resulted in a shallow pistol grip; these became the “scant” stocks (presumably so named because the wood was too scant to allow a full pistol grip).

The 1903A1 “scant” stock. Note the relaxed pistol grip aft of the trigger, and on this particular rifle, the crisp Springfield Armory cartouche stamped into the walnut.
Check out the 1903’s early, complex, adjustable rear sight. There’s was a lot of machine time and money there. The Army needed something less expensive.
Load development for the 1903A1. These were cast bullets loaded with IMR 3031 powder. This particular rifle prefers jacked bullets with IMR4320 powder.

Later, the Army realized that the 1903’s fancy rear sight and other features were overly-expensive for a standard-issue battle rifle, so the ’03 was “value engineered” to make it less costly to manufacture. These became the Model 1903A3 rifles, often referred to simply as the ‘03A3.

Somewhere while all this was going on, the Army introduced versions of this rifle chambered in .22 Long Rifle.  They were intended to be trainers, but they proved to be exceptionally accurate and the Army’s shooting teams (and others) competed with them.

The .22 Long Rifle cartridge (fired in the M1922 rifle), and the .30 06 Springfield cartridge (fired in the Model 1903).

The M1922s are phenomenal rifles, they are rare, and they are expensive in those rare instances they come on the market.  My Dad bought one released through the Civilian Marksmanship Program 60 years ago for $25.   Today, when one changes hands, you can bet the price is somewhere around $3,000.  They’re that rare, and they’re that good.

The starboard side of the M1922. It is an elegant rifle.
Lyman competition aperture sights on the M1922.
The M1922’s Lyman aperture front sight. This rifle has “peep-to-peep” sights; both the rear and the front sights have holes to allow “peeping” at the target. They work very, very well.

You might be wondering:  How do these rifles shoot?

Very well, thank you.

The M1922’s results at 50 yards. On the first bullseye on the left, the lone shot out of the black (at the 12:30 position) was the first shot of the day, fired from a cold and wet barrel.
Targets shot with the Model 1903A1. The one on the left was terrible; I shot it with cast bullets at velocities too high for the bullet (the lead smeared in the barrel and the bullets wouldn’t group). The remaining four were shot with one of my favorite .30 06 loads (a 130 grain Hornady jacketed soft point bullet and 52.0 grains of IMR 4320 powder).

So, what happened to the 1903 as a military rifle?   It served in World War I (although we couldn’t make them fast enough, so another rifle, the Model 1917, accounted for more than half the US battle rifles during the Great War).  By the 1930s, we were already hard at work developing the Garand (that rifle fired the same .30 06 cartridge, and it was a semi-auto).  The Garand became the US Army’s standard rifle in World War II.  Interestingly, the US Marines stuck with the 1903 going into World War II, but they, too, soon switched to the Garand.  The 1903 evolved into a specialty item.  It was still recognized as phenomenally accurate and it became our sniper rifle in World War II (with a telescopic sight, it became the 1903A4).

Like I said, all of the above is the Reader’s Digest version of the story behind the Model 1903 rifle.  The definitive reference on the 1903-series Springfield rifles is Joe Poyer’s The Model 1903 Springfield Rifle and Its Variations, and if you have a deeper interest in these historic and fine rifles, it is a book you should own.  You can find it on Amazon.


Help us bring more stories to you:  Please click on the popup ads!


Check out our other Tales of the Gun stories here!


Never miss an ExNotes blog!  Sign up here:

Joe Berk

Recent Posts

ExNotes Review: UABRLA Tire Inflator

By Joe Gresh There's a reason we call this pump a tire inflator instead of…

1 day ago

World War II Harleys

By Joe Berk Harley-Davidson built four military motorcycles during World War II: The WLA, the…

5 days ago

ExNotes Long Term Test: Oxilam LED Headlight Bulb

By Joe Gresh As you'll recall from the Oxilam headlight review we published on ExhaustNotes…

1 week ago

Shinya Kimura at the Harley Museum

By Joe Berk Astute readers will remember our post on Shinya Kimura, an artist who…

2 weeks ago

Krabi, Thailand

By Mike Huber After 5 weeks on Koh Tao it was time to move on…

2 weeks ago

A Stag Film?

By Joe Berk For a guy who doesn’t collect knives, I sure seem to have…

2 weeks ago