Twinkle, twinkle, little Star…

Sometimes you just get lucky.  That’s what happened to me.  I’m buying a used snubnosed .38 Special (there will be a blog on it in a few weeks), and I used a different federal firearms license dealer for the transfer (I always buy through an FFL dealer to keep things legal).  The seller had an FFL dealer he wanted to use, and much to my surprise it happened to be one of the rangemasters at the West End Gun Club (a guy I already knew).  We all had a nice visit, and while I was there, I was looking around the shop and my eye turned to an old progressive reloader.  I love old stuff, and if you’re reading this, you probably do, too.

Now when I say progressive, I don’t mean the reloader leans left or votes democrat.  Nope, progressive in the reloading world means each pull of the lever results in a finished round coming off the machine.  With each stroke, a cartridge case is resized and deprimed, another is flared, another is charged with powder, another has a bullet seated in the brass case and crimped, and a new one is spit out.  Then, on the lever upstroke, the base plate rotates (it progresses, hence the name), and the sequence continues.  The output on a progressive is impressive.  You can reload north of 500 rounds an hour on these things.

This particular progressive is one of the first ones and it was made by a company called the Star Machine Works.  They first came out in the 1930s.  I don’t know exactly when mine was made, but it had my attention this morning and I guess that was obvious.  My rangemaster buddy told I could take it home with me if I wanted.

“How much?” I asked.  I think he could see that the hook was already set.  I wanted it.  And I guess it showed.

“You could take it home with you.”

“I think I will,” I said, “but tell me how much.”

“No,” he said, “you can take it home.  It’s yours.”

You can’t beat a deal like that.  The pictures you see here are of my new-to-me (but probably older than me) Star progressive reloader on my reloading bench.  It’s going to go through a Joe Gresh-style resurrection, and we’ll tell the story here on ExNotes.  There won’t be any cosmetics (I love the patina on this thing), and I want to keep the look as you see it here.  The Star will only undergo the stuff that’s needed to make it functional.  And you’ll be able to follow the Star’s resurrection here on the blog.

This Star is set up for .38 Special and .357 Magnum (both cartridges take the same dies), and there are still a few cases in the machine from who knows when.  You can see how they index into the plate, and it’s that plate that advances with each stroke of the lever.

The photo above shows the case feeding mechanism.  I haven’t attempted to clean it up or actuate the press yet.  What you see is exactly how it came home with me.

The big tube behind the lever and head is the powder container, and the narrow tube to the right is (I think) the primer dispenser.

I’ll start cleaning the Star this week, and once I’ve got it cleaned and lubed I’ll do my best to understand how it operates.  I’m not nearly as mechanically talented as Joe Gresh, so this resurrection will probably take a while.  But I’m going to enjoy the ride, and I think you will, too.  Like we always say:  Stay tuned.

---

Boy oh boy, we’ve got cool stuff to link to, like our Resurrections page and our Tales of the Gun page.  And hey, if you don’t want to miss any of it, be sure to subscribe to the ExNotes blog.  We’re running a special this month, and if you sign up now, it’s free!