My Big, Fat, BMW Obsession: A Cautionary Tale

Unlike today, when I tend to mercilessly ridicule BMW motorcycles and their insufferable owners there was a time when I ended up owning several of the damn things. Only one, a 1973 R75/5, was actually bought on purpose. When I got the R75/5 it was in almost new condition and just 2 years old. I was living in Florida and traded a small-window 1957 Volkswagen van and $1300 dollars for the bike to a guy who lived in Fort Lauderdale. That van would be worth a wad of money now but who has time to wait around for the zeitgeist? Certainly not me, I’m a man on the go.

The R75/5 was a great bike. It wasn’t as fast as the Japanese 750’s but it weighed 100 pounds less than those bikes. Weight has always been important to me. The 750 was pretty good off road and I used to take it scrambling over at the Florida East Coast railway yards. The FEC had thousands of unused acres where my pals and I could ride motorcycles, set things on fire and strip down stolen cars.

The biggest problem with the Toaster Tank 750/5 was a really bad high-speed weave. I never got it past 100mph because it was so scary. BMW put a steering damper knob on the top triple clamp but you had to crank it down so tight to stop the weave you could hardly turn. This weave was somewhat cured by a 2” longer swing arm on the /6 models. The next biggest problem on the 750 was a weak charging system. If you ran the headlight too long the piss-poor alternator couldn’t keep the battery hot enough to use the electric start. I rode that BMW all over the USA in 1975 and had to kick start it most of the way.

My next BMW came along when I was living in San Diego, California. It was a R60/5 with a faded pink, 6-gallon gas tank. It was one of those cheap deals that you buy just because it’s so cheap. I think I paid around $100 for the bike because the engine didn’t run. The R60/5 model was 600cc. On R60s the final drive was re-geared to reflect the lower horsepower. The only one I ever rode was dramatically slower than the 750. It was a lot slower than the 150cc difference would have you believe and wouldn’t go fast enough to weave. I never liked the 600cc BMW because it was such a dog. I ended up with one anyway.

I unstuck the pistons and took the $100 R60/5 engine apart. It wasn’t in bad shape inside so I decided to lightly hone the cylinders and put new piston rings in the thing. My buddy Glenn and I rode my 550 Honda 4-banger up to a Los Angeles BMW dealer to get parts. That’s how it was, if you were going to LA for parts your buddy might tag along just for something to do. We didn’t have cell phones. I don’t remember if there was a BMW dealer in San Diego back then. It was kind of a one-horse town and you had to go north to LA for a lot of reasons. I’ve also forgotten the name of the dealer I went to but I think it was off the 405 somewhere, maybe Long beach.

Amazingly the BMW dealer had the rings in stock but wanted $35 per piston for each set of 3 rings or $70 plus tax. I was stunned at the cost. I was earning $3.25 an hour back then. You could get 8 pistons, 8 wristpins and 8 sets of rings for a Chevy small-block for $100. You could buy 2 brand new Volkswagen jugs and 4 pistons plus rings for $100. I owned cars that cost less than $70.

I remember getting pissed off at the BMW parts guy and yelling at him, “I’ll make my own damn rings!” and storming out of the place. Outside the dealership Glenn tried to talk some sense into me. “Where else are you going to get rings?” He said. I was kind of stubborn, “Screw it I’ll make them.” I said again, but not as loudly as before. We rode back to San Diego without any BMW parts.

Turns out, making piston rings is not so easy. I tried to find an engine that used a piston the same size as the R60 but time passed and the R60/5 just sat there in pieces. I ended up selling the R60/5 to Glenn for the same amount of money as I paid for it. Glenn rode back alone to the same BMW dealer and bought the rings. He eventually got the bike running but it was so boring to ride he sold it shortly thereafter.

I was done with BMWs for 25 years or so until my buddy Roger gave me his basket case R60/5 when I was living in the Florida Keys. Roger had taken the bike apart after another guy had crashed it and bent the frame. Roger said to me “I’m never going to get that bike running, do you want it?” And like the idiot I am I said “Yes I do.”

Those old, oval-tube BMW frames are some tough cookies. It took a lot of heat and hammering to get it fairly straight again. I discovered Bob’s mail order BMW store and finally purchased that set of rings. They were still $35 a side but I was making a bit more money so it didn’t seen so bad. Plus, I had calmed down over the years.

I freshened up the R60’s engine, cleaned the carbs, and painted the now kinda-straight-ish frame. I bought a new exhaust system to replace the smashed original ones, got new tires and tubes, took a kink out of the front wheel and had myself a roller. I pulled dents out of the 6-gallon tank and bonded it up a bit, then painted the tank and started assembling the motorcycle. I had it a few days from running when the hurricane hit.

Four feet of storm surge flooded the shed where the R60/5 was parked. The engine and gas tank were full of salt water. Our house was wrecked. Our other vehicles were submerged and ruined. It was a disaster. All I had time to do was to drain the salt water out of the Beemer’s engine and flush it with gasoline. As you can imagine, new, more urgent projects sprung up and I finally gave the BMW to another buddy, Charlie.

Charlie tinkered with the bike for a few months but the engine finally seized up and he sold it for $200 to some other poor sucker. So you can see why I’m a bit shirty when it comes to BMWs. I mock them to cover my pain. We have had a long, tortured history, BMW and I, and in that long history I nearly always come out on the losing end.

---

Never miss an ExNotes blog:  Sign up here for free!

---

Don’t forget to click on those pop up ads!