Tag: BMG

Product Test: BMG Adventure Pants

As any loyal reader of ExhaustNotes.us knows, I recently got all new riding gear from British Motorcycle Gear. In this blog we tackle BMG’s Adventure pants, a lighter weight alternative to BMG’s Pioneer pants. When I say lighter weight I don’t want to mislead you; the Adventure pants are still heavier than denim jeans.

The Adventures have two zippered vents on the front side that let in a lot of air when you stand up on the pegs like a real adventure rider is prone to doing whenever there is a camera around. Sitting down like a lazy chopper rider, the vent flow is less powerful but you can still feel it. There is a mesh liner that combined with the 500 denier shell gives a good compromise between protection and sweating.

One feature that stands out for me is the heat resistant, Nomex inner-calf panels. The high-mount, left-side Husqvarna exhaust system has burned a hole through several of my rain pants and street slacks. So far I haven’t been able to melt the Adventure pants.

Another feature I like on the Adventure pants are the three belt loops. I’d like to have a few more loops but three loops beat none because I wear a belt. You’d have to have a misshapen body like mine to appreciate the extra security a belt gives you in big-air situations. There’s nothing more embarrassing than getting pantsed by gravity.

On the sides of the Adventure pants are waist adjusters. These are handy for postprandial riding when your belly is bloated from too many carbohydrates. My odd combination of fat waist and short legs make finding motorcycle pants to fit a real challenge. I’ve been riding motorcycles for 50 years and the BMG Adventure pants come the closest to fitting in all those years. The 29-inch legs could be a 1/2 –inch shorter but as long as I have my belt it’s not a problem.

My Adventure pants came without armor, which is fine with me. I also have the much heavier-duty, armored BMG Pioneer pants to test but that will have to wait for cooler weather. The Adventures have long leg zippers but I didn’t need them to enter or egress the pant. If you are a weirdo who puts their boots on first, then your pants you will find the zippers handy. There is a short piece of zipper on the backside that can connect to BMG’s line of jackets. I never use those back zippers but I bet they stop drafts pretty well. The back zipper will also keep your jacket from riding up in a crash and possibly save a few square feet of road rash. Hmmm…maybe I should start using that zipper!

I’ve worn the Adventure pants down to 40 degrees with only a thin thermal underwear layer and was warm and comfortable. For my personal thermostat 40 to 80 degrees F was right in the Adventure pant wheelhouse. Above 90 and into the 100’s the Adventure pants are a bit too warm for my taste. Really, for motorcycle riding above 100 degrees shorts and flip-flops are the only way to go. Just kidding.

For New Mexico use the BMG Adventure pant is a great 3-season bit of riding kit. If you live where it rarely gets to 90 degrees or above then you can call them 4-season pants. I feel safer wearing them on a motorcycle than I do in plain old dungarees. The retail price of $199 is not out of this world when you consider the price of Levis jeans or cigarettes. Don’t forget to use the exhaustnotes.us discount code (BMGJOES) when you order from BMG to save a few bucks.  Run your order up to over $199 and you’ll get free shipping, too.

Visit our Product Reviews page here!

Product Test: British Motorcycle Gear Rapido Gloves

I have managed to use British Motorcycle Gear’s Rapido gloves in temperatures ranging from the low 40s to the mid-90s and they have worked well across that range. All in, I’ve done about 600 miles wearing these gloves. Despite the wide temperature variations the gloves were never uncomfortably hot on my rides around muggy, warm Daytona last month.

The Rapidos are fairly stiff when you first put them on. Normally stiff is an attribute men aspire to but getting the Rapidos on and off was a bit of a struggle the first day. By day 4 the gloves had loosened up quite a bit and I no longer thought about the process.

Another reason I had trouble getting in the Rapidos was because they come with triple hook and loop straps, two on the gauntlet and one on the wrist. I didn’t realize the wrist strap adjusted and so was forcing them on willy-nilly. Loosening all the straps made it easier.

One benefit to all those straps is security: once tightened down this glove is not going to fly off in a crash unless your hand is still inside it. More security is provided by the thick rubber finger guards on the leading edge of the glove. If you’ve done much off-roading with faster buddies you know how painful a rock tossed into your hand can be. I wish I had these on a few months ago when Mike kicked up a boulder into my finger. It felt like the thing was broken. Three of the finger guards have little vents built into them, kind of like little hood scoops. The vents don’t pass much air but if you hold your hand out fingers forward you can feel the air coming in.

Yet more security comes in the form of a carbon fiber looking knuckle plate attached to the glove. BMG calls it Carbon Leather, I think. I haven’t managed to test this bit because I don’t want to hurt myself but if your hand became pinned beneath the bike and the pavement (never let go of the bike!) I imagine it would buy a few hundred feet of abrasion before you started to lose any knuckle. Amazingly, all that armor does not restrict hand movement much and once the gloves are broken in you can make a fist easily.

The Rapidos have a fairly long gauntlet and with the straps disconnected the mouth opens wide to fit big jacket sleeves. There’s a decent range of adjustment on the gauntlet. I was able to snug them down while riding in just a T-shirt and a G-string. The Rapido’s palm area has a lot of activity going on what with extra pads and stitches but none of it seemed to cause blisters. The Rapidos are heavier duty gloves than I’m used to wearing. They feel like they might actually protect your hands in a wipeout. I usually wear long white opera gloves or Harbor freight Nitrile gloves when riding motorcycles.

My red Rapido glove’s appearance is not exactly conservative; in fact they’re downright flashy. When I put them on I get a strange urge to crash The Avengers from the Marvel movie series. If you’re an under-the-radar guy get the black Rapidos. At $79 list price the Rapidos are not cheap but my regular work gloves run 10 or 12 bucks a pair and they don’t have near as many nifty features as the Rapidos.

I’m going to use the Rapidos for the next few years and I’ll be sure to write an Exhaustnotes long term review if the world doesn’t end before the gloves do. Maybe we’ll get lucky and I’ll get to crash test the Rapidos.

Hasty Conclusions: First Test of The British Motorcycle Gear Mercury Jacket

Here at Exhaustnotes.us we don’t have to wait until we know what we are talking about to give you our impressions of new gear sent to us for review. No, we can do whatever, whenever we want and right now I want to tell you about this swell jacket. You’ll get a longer-term review after Daytona Bike week.

BMG’s Mercury jacket is warm. The thing comes with a liner made of something like plutonium or krypton. The (only) day I tried the jacket temperatures ranged from 45 degrees to 70 degrees Fahrenheit. My base layer was a cotton T-shirt, no logo. At 45 degrees I was a bit cold but nothing unbearable. As the temps got into the high 60’s low 70’s the jacket became warm. It was fine as long as your speeds were above 40-50 miles per hour.

I could have taken several steps as the weather warmed up. I could have taken the liner out. I could have opened the vents (which I did later on) but I’m lazy and just put up with the heat.

The collar on the BMG Mercury jacket is designed well. I can lock it in solid and it doesn’t chafe on my helmet when I rotate my head to preen. Some jackets catch helmet parts and make cleaning tail feathers a less rider-friendly operation.

The sleeves have both a zipper and hook-and-loop fasteners strips to seal off your wrists. This is great for me because I ride without gloves when I am operating a camera or getting on and off the bike frequently. Using the two closing methods you can achieve an airtight wrap and stop the cold from entering your arm area.

Closing the jacket is also a multi-level affair; a zipper, hook-and-loop strips then snaps should pretty much keep the coat from opening up in a crash. The jacket has light shoulder/elbow armor that doesn’t intrude on comfort. Which is fine by me, I don’t like heavily armored motorcycle gear.

There are two front and two rear vents that are not huge but when open make the jacket noticeably cooler. After getting a bit hot on slower trails I ran them open until around 5pm when New Mexico’s February temps start dropping. I closed the vents and had a snug, evening ride home, arriving back at Tinfiny Ranch around 55 degrees, the perfect temperature for using the Mercury fully deployed.

The Mercury comes with a lot of adjustable straps to control the shape of the thing. I didn’t mess with them because it was fine with the liner installed. I imagine in hot weather I’ll have to take the liner out and then those extra snaps and straps will help prevent flutter.

The British Motorcycle Gear Mercury Jacket really works well for New Mexico’s daily 40-degree temperature swings. I think if I combined it with a t-shirt and my electric vest I would be good down to the mid-30 degree range. Available from BritishMotorcycleGear.com at a list price of $250 the jacket is not outrageously expensive and appears well made. I’m taking it with me to Daytona’s Bike Week where I hope to gather more information on the Mercury’s rain proofing and function without the liner.

More great gear reviews are here!