One of the main halls in Bill’s Old Bike Barn features Moto Guzzi and military motorcycles along with other militaria, motorcycle engines, and more. We know Moto Guzzi primarily as sporting motorcycles. Back in the day, though (the day being World War II and beyond), Moto Guzzi made motorcycles for the Italian Army. Good buddy Bill has a few and they are on display, along with military motos from Germany and America and sporting Moto Guzzis.
The Harley WL comes to mind first when anyone mentions military motorcycles. It’s the iconic World War II American military motorcycle. It’s a 750cc flathead V-twin, OD green, and it has a scabbard for a .45 ACP Thompson (and there’s one in Bill’s WL).
The German counterpart was a 750cc flathead BMW and sidecar. Zündapp also provided sidecar bikes to the Wehrmacht. And BMW also had a 600cc overhead valve model. Bill has a BMW with sidecar on display in this hall, but it’s a later model (note the overhead valve engine configuration).
Here’s another interesting military motorcycle: The 1946 500cc single-cylinder Moto Guzzi Alce. You wouldn’t think a motorcycle would be notable for its sidestand, but that’s one of the first things I noticed about it and Bill made the same comment. If you’ve ever tried to park a motorcycle in soft sand, you’ll know what this motorcycle is all about.
Harley-Davidson wandered into the military motorcycle world when they bought the Armstrong-CCM company in 1987. Armstrong had a 500cc single-cylinder Rotax-powered bike and Harley probably thought they would make a killing selling these to the US Army, but they were a day late and more than a dollar short. The Army had zero interest in gasoline-powered vehicles (the US Army has been 100% diesel powered for decades…I knew that when I was in the Army in the 1970s). The effort was quickly abandoned. That’s the bad news. The good news? The Harley MT 500 military bikes became instant collectibles. And Bill’s Old Bike Barn has one.
The military room also houses the Moto Guzzi Mulo Meccanico, and motorcycle half-track featured in an earlier ExNotes blog.
The Mulo and the Alce military bike share real estate in Bill’s Old Bike Barn, along with commercial and very desirable Moto Guzzi non-military motorcycles. Here’s an early 1970s Moto Guzzi Ambassador.
Bill’s Old Bike Barn includes what has to be the definitive Moto Guzzi motorcycle classic, the Falcone 500. In case you’ve ever wondered, it’s pronounced “fowl-cone-ay.” Fire engine red is a color that works well on Moto Guzzis.
One of the more unique “motorcycles” in Bills Old Bike Barn is a 1961 motorcycle-based dump truck. Bill kept it in its original unrestored condition for a number of years and used it to haul manure around on his farm (I used to write proposals in the defense industry, so Bill and I have that in common). Bill cleaned up the Guzzi dump truck, customized it with a show-worthy paint job, and made it too pretty to use. This is a three wheeler built around the same 500cc Falcone baloney-slicer motor shown above.
So there you have it, folks. This is the last in our series of blogs about Bill’s Old Bike Barn. I enjoyed my visit to Bill’s more than I have to any other museum, partly because of the content and partly because of Bill. If you’re looking for a worthy destination and an experience like no other, Bill’s Old Bike Barn should be at the top of your list. I’d allow a full day for the visit, maybe with a break for lunch. We asked Bill for the best kept secret regarding Bloomsburg fine dining and his answer was immediate: The Scoreboard. It’s only a mile or two away and you can Waze your way there. Try the chili; it’s excellent.
There are six blogs in our series about Bill’s Old Bike Barn. Here’s a set of links to the first five:
Our first blog on Bill’s Old Bike Barn? Hey, here it is:
Bill Morris: The Man. It’s a great story.
Military motorcycle half-tracks? You bet!
With 200 motorcycles in his collection, Bill’s personal favorite might surprise you!
What drives a man like Bill to collect? Our story on Billville and the Collections answers the mail:
Never miss an ExhaustNotes blog…sign up here for a free subscription:
I take a 2-1/2 inch diameter hole saw and drill out a piece of 1/8 inch thick aluminum. It leaves me with a 2-3/8 inch diameter disk with a 1/4 inch hole in the middle. I then nut and bolt it or drill and tap it to the bottom of my sidestand on every bike I own. I spray it black. I can park up my bike on a soft loam lawn or sand without issue. The whole process takes a half hour and looks fairly factory.
That is a much better approach than looking for an empty beer can (which is what I usually do).
The upside down forks on the Falcone and the front suspension on the MG dump truck look very interesting. How do you say TeleLever in Italian?
I have really enjoyed your Bike Barn posts.
Best
ZipTye
Thanks very much. I had a lot of fun writing them.