Shoemaker Holsters

By Joe Berk

Back in the 1970s I was a falling plate competitor. That competition involved knocking over a set of steel plates at a relatively short distance, usually with something in .38 Special or .45 ACP.  In those days, nobody competed with a 9mm; the 9mm pistols had not made the inroads they enjoy today. A lot of guys competed with 1911s or modified K-frame S&Ws; I was a bit of an oddball and I used an N-frame Smith and Wesson .44 Magnum (with light .44 Specials, as the shot-to-shot recovery was faster and the .44 Special easily knocked the plates down). We shot from the ready position, with the gun held at an angle to the ground.  The video below gives you an idea what the falling plate game looks like:

There were variations of this competition. The most exciting one was a bowling pin competition, which involved clearing a half dozen bowling pins from a table. In that one, you needed a .44 or a .45; the .38 Special didn’t have the energy to clear a bowling pin off the table.  Both competitions were all about speed; whoever knocked all the plates over (or blew away all of the bowling pins) in the shortest time won.

Other similar competitions involved drawing the gun from a holster, and I wanted to shoot my AMT Long Slide Hardballer, a really cool 7-inch-barreled 1911. It’s the one Arnold Schwarzenegger used in Terminator.

An AMT (Arcadia Machine and Tool) Long Slide Hardballer. The story on it is here.

I needed a holster long enough to hold the Long Slide AMT 1911, and at that time there were none on the market. Other holsters could hold either 5-inch or 4 ¼-inch 1911s, but nobody had anything for the 7-inch AMT.  Hold that thought. I’ll come back to it shortly.


I’ve written about good buddy Mike here on the blog before. Mike and I have been buddies since junior high school. He went on to become Chief of the New Brunswick Police Department. We still talk every week. Mike deputized me a couple of times when he attended the International Association of Chiefs of Police conventions. I’d always ask for a gun, and the answer was always no.  But we had a lot of fun at those conventions.

The Director at the International Association of Chiefs of Police 2023 convention. I was his administrative assistant on that adventure. That story is here.

Mike called me last week. He was pumped up. He found his old New Brunswick Police Department duty holster from the days when they carried Heckler & Koch P7M8 9mm squeeze cocker semi-autos. That was the gun the New Jersey State Troopers adopted back in the ‘80s.

A New Jersey State Trooper Heckler & Koch P7M8 and its Tex Shoemaker holster.
The NJSP emblem embossed on the Tex Shoemaker holster.

The New Jersey State Police had custom holsters crafted for their handguns by the Tex Shoemaker company, a legend in the holster business. They also had Shoemaker emboss the NJSP emblem in the leather. Not to be outdone, the New Brunswick Police Department also adopted the Heckler & Koch P7M8 9mm semi-auto, and they, too went to Tex Shoemaker for holsters embossed with the NBPD emblem. Mike had one when he served, and it was this holster he recently found. The Tex Shoemaker H&K police duty holsters have become collectible items, with this particular model appearing on Ebay for $300. Mike is going to donate his to the New Brunswick Police Department Headquarters display case. I think that’s pretty cool.

Good buddy Mike’s Heckler & Koch P7M8 Tex Shoemaker holster.
The Heckler & Koch P7M8 holster with an embossed New Brunswick Police department emblem.

So I was thinking about this story and Mike’s holster and then I remembered: Hey, I have a Tex Shoemaker holster, and mine is brand new. The Tex Shoemaker company was located in San Dimas, which is not very far from my home. They closed up shop in 2019 (I’m assuming it fell victim to the pandemic, the move toward plastic holsters, and competition from the plastic holster manufacturers).  Whatever the reason, it’s a pity.  Shoemaker’s was an old line holster manufacturer started by Tex Shoemaker, a former lawman who started out making holsters in his garage.  Their quality was unsurpassed.

When I needed a quick draw holster for my anticipated pistol competition (as described at the beginning of this blog), I couldn’t find anyone in the ‘80s who was making a holster for the AMT Long Slide Hardballer. I searched the yellow pages for holster companies (this was all pre-Internet), and that’s when I learned that the Tex Shoemaker company was nearby. I called them and explained what I wanted. I spoke with a nice guy who told me he didn’t know of anybody making a holster for the Long Slide 1911, but Shoemaker was experimenting with a new break-front holster that would handle all 1911 barrel lengths. He explained that it wasn’t on the market yet, but I could swing by and take a look at it.

My AMT Long Slide in it’s Tex Shoemaker experimental holster.
The Tex Shoemaker logo.

Sue and I rode over to Shoemaker’s that day.  It was a factory and they didn’t have a retail facility, so I walked up to the loading dock, looked up at a guy standing above me, and explained why I was there. A minute later that same nice guy I had spoken with on the phone appeared with the holster he told me about on the phone. I had my Long Slide with me and we tried the big 1911 in it; the fit was perfect. He also had two magazine holders (together they could hold four magazines).  The holster was just what the doctor ordered, and I told him that even though it wasn’t commercially available yet, I’d like to buy it.  He smiled, gave all three items to me, and told me there was no charge.

The Tex Shoemaker holster is adjustable for draw angle. It’s a cool feature.
For normal carry, the pistol is secured with a cross strap.
For quick draw work, the cross strap is removed. The holster has a strong clamp spring inside the leather that secures the pistol. When drawn, the pistol can be snapped forward without withdrawing upward from the holster.
The Long Slide Hardballer, the Tex Shoemaker holster, and two Tex Shoemaker magazine holders.
The Tex Shoemaker logo on the back of a magazine holder.

I was shocked when that nice man told me there was no charge, and then I realized I didn’t even know who he was.  I introduced myself, and as we shook hands, he told me his name: Randy Shoemaker.  Randy Shoemaker was Tex Shoemaker’s son.

I never pursued quick draw competition.  I had visions of shooting myself in the foot, and it just wasn’t something I wanted to do.  But I sure enjoy owning my Tex Shoemaker leather.   Maybe someday, I’ll enter the Quick Draw McGraw games.   In the meantime, here’s an unashamedly doctored video of me playing around a few years ago at the West End Gun Club.


Never miss an ExNotes blog:



Don’t forget: Visit our advertisers!


11 thoughts on “Shoemaker Holsters”

    1. Unfortunately, no. I think I mentioned in the article that Shoemaker went out of business.

    2. Joe said they closed up shop in 2019.
      It’s sad how small enterprising companies have been forced out of bizz.
      These holsters are beautifies. Why anyone would want a plastic holster is beyond me.

  1. In the words of another great American police officer who perfected the “Barnie” carry.
    “Because real men only need 1 bullet”
    😱 🤪🤪🤪🤪

    1. I can see that with a rifle, but not a handgun.

      The average number of shots fired in an altercation with a handgun is 1.7.

  2. Great article and thanks for the mention in the article. Oh by the way, “No Joe. No gun, no badge, no handcuffs!”

  3. Great story, Joe (hey, they’re ALL great!)

    Go fix the lack of hyperlink in the photo caption: “The Director at the International Association of Chiefs of Police 2023 convention. I was his administrative assistant on that adventure. That story is here.”

  4. I remember those skittle shoots, and yes, you pretty much had to use a 1911 in those days. Although I recall using the absolute prototype S.P.A.S. 12 on Salisbury Plain before the ex-Special Boat Service designer sold it to Franchi (who most definitely did NOT invent it, whatever the ads told people).

    But for once, your matchless prose is incorrect. There was a holster for the Long Slide 1911. I had one; it was called a Yacqui Slide. They’re still around, and here’s the link to prove it – https://www.galcogunleather.com/yaqui-slide-belt-holster_8_4_1343.html

    Mine was much nicer than that example, with no metalwork but long gone, like my 1911. I seem to remember a very similar competition breakfront, too, but the mists of time have obscured who made it.

    1. Good inputs, Carl, and as always, thanks for commenting. Always good to hear from you.

Comments are closed.

Discover more from The ExhaustNotes Blog

Subscribe now to keep reading and get access to the full archive.

Continue reading