I’m not a Glock guy and it’s not likely I’ll ever own one, but Glock (a book by Paul M. Barrett about Gaston Glock and the pistols that carry his name) sure is an interesting read.
Gaston Glock surprised everyone when he submitted a bid with a new design for a military handgun. He surprised people even more when he won the competition, and then he (and the company that bears his name) were on their way. Glock ran a small-potatoes company in Austria that made automobile radiators. He knew nothing about firearms and military contracts. Maybe that was his advantage. Glock started with a clean sheet of paper, both for the gun’s design and his approach to market.
Barrett tells an interesting story about how Glock employed unorthodox marketing practices (practices involving a former porn princess and lots of company freebies) to become one of the most successful arms manufacturers on the planet. It really is a fascinating story. Corporate shenanigans, arms deals, palace intrigue, an attempt on Gaston Glock’s life, police shootouts, and more: Glock has it all.
I’ve shot Glocks (I have friends who own them). I get that they are inexpensive and reliable. I don’t like striker-fired (i.e., hammerless) trigger pulls and I’m not a big fan of Tupperware guns (even though my primary carry gun is a Tupperware Smith and Wesson), but I understand the reasons behind Glock’s success, and I understand those reasons even better now that I’ve read Barrett’s book. Trust me on this: If you’re interested in firearms and you want a good read, look no further than Glock. You can thank me later.
The International Association of Chiefs of Police…it’s an organization most folks have never heard of, but it’s been around for 130 years. My good buddy Mike is a member and he invited me along as his guest to the 2023 IACP convention (Mike and I have known each other since the 7th grade, and that means we’ve been friends for more than 60 years). It’s the third or fourth time I’ve attended the IACP show, and it’s always great. The IACP convention was in San Diego this year, and any time I have an opportunity to visit that beautiful town, I’m in. Susie and I rolled south in the Subie; Mike had already flown in. All kinds of companies have exhibits at the IACP convention, and many federal and state law enforcement agencies have displays. The United States Secret Service was there and they had one of the presidential limos on display. The photo at the top of this blog is yours truly reflected in the presidential limo’s deep black paint.
So who exhibits at the IACP? All kinds of government organizations and all kinds of businesses. Many of the exhibitors were software companies (including Microsoft) specializing in data base and other police applications. There were several outfits advertising armor plating for people, automobiles, war wagons, and more.
Body armor in your choice of colors. I’d wear it, but it would make me look fat.Impressive. Bullet proof glass may become an optional accessory for civilians here in the Peoples Republik of Kalifornia.Another bullet proof barrier supplier. Check out the photos below.Here’s another bulletproof barrier company, with several of the cartridges its material can stop displayed.A close-up photo of one of the cartridges.The above door interior. None of the bullets made it through.
As you might expect, gun companies also display at the IACP convention. The ones I saw this year included Glock (with the largest display), SIG Sauer, Beretta, and a few different AR manufacturers. Surprisingly, Smith and Wesson wasn’t there (if they were, I missed them), nor was Colt (not many police departments carry Colt handguns these days).
Glock’s booth at the IACP convention. These guys had a lot of visitors. Glocks are popular and they are relatively inexpensive.
The Beretta and SIG booths were quiet. There was a lot of activity at the Glock exhibit. I spent some time at the Glock booth talking to one of their reps, and he was informative when I asked about using cast bullets in a Glock. I’d previously heard that Glock advises against using cast bullets in their pistols, and I asked if that was true. Glocks have barrels with polygonal rifling, and as such, there are no lands and grooves (there are just raised and lowered areas that twist along the barrel’s length). The Glock rep explained to me that they do indeed recommend not using cast bullets, as the lead has nowhere to go when it accumulates in the bore. When the barrels experiencing leading, it constricts the bore, and this raises pressures higher than what would be experienced in a conventionally-rifled pistol barrel. He said if you clean the barrel often enough (so that leading does not accumulate), shooting cast lead bullets would probably be okay, but how many shots can be fired before this becomes a problem is too dicey a proposition for Glock to provide a number. I also asked about copper plated (as opposed to jacketed) bullets, and the Glock rep told me that they advise against using those as well. To me, it’s not a big deal, as I don’t own a Glock, I always clean my guns, and virtually every firearm manufacturer advises against shooting reloaded ammo anyway. Eh, what do they know? The only time I ever shoot factory (i.e., non-reloaded) ammo in my handguns is when I have to requalify for my concealed carry permit.
Glock pistols. I don’t follow Glock, so I don’t know what their different models are. The red and the blue guns are training guns.SIG Sauer’s 226 X-5. This is an impressive handgun.
I saw the new SIG target model (the 226 X5) and I fell in love with it. Unfortunately, the X5 is not available to us here in the Peoples Republik of Kalifornia (it’s not on the California Department of Justice roster of approved handguns). The SIG X5 is expensive at $2219, but I’d buy one in a heartbeat if it was sold here. It fits like my hand like a glove and the trigger is superb. The grips are nice, too. The X5 has all steel construction, so it’s heavier than the standard 226 (which has an aluminum frame). I sure wish it was available here. On the plus side, SIG’s M18 is now available in California. It’s the Army’s new sidearm. It has a striker firing mechanism (there’s no hammer), so the trigger pull is not what I would call good (as is the case, in my opinion, with all striker-fired handguns). The M18 is about $700 and I am tempted. I like SIG handguns.
There were taser manufacturers and firearms training simulator manufacturers at IACP, too. The photos below show a taser virtual reality simulator. You wear a headset that covers your eyes and hold a taser gun. I think the company was Axon. They had about 20 stations for people to try it. The rep explained that you have to fire twice…once in a noncritical area and then again in another non-critical area. When you do that on the simulated bad guy in the virtual reality headset, the bad guy goes down. Sometimes you have to fire more than two times because your suspected felon doesn’t cooperate and keel over immediately. You get about 15 runs against assorted bad guys, and I toasted every one of them. Then there’s an officer needs assistance call where you roll up on a police officer having difficulty subduing a bad guy. I fried that bad guy, too. It was fun.
Virtual reality and a taser. It was awesome.Me, in my VR world.
Another company, Sim Lab, had a target gallery with moving silhouette targets and your choice of either a SIG or a Glock (I went with the SIG). I did pretty good on that one, too, and after I had toasted their bad guys the Sim Lab rep said I was a good shot. That made this IACP convention one of the best ever for me.
The Sim Lab setup. I opted for the SIG M18. I may get a real M18 one of these days.
After I shot the Sim Lab course, the rep asked if I wanted a video. Hey, does a man in the desert want water? Does a California resident want gas prices below $5 a gallon. “You bet,” I answered, and I fired the course again. It was fun. (Pro Tip: The video looks better if you expand it to full screen.)
There were a couple of first aid equipment manufacturers at IACP 2023, and the exhibits were surprisingly lifelike. And gruesome. You couldn’t walk by their exhibits without looking (and taking a photo or two).
This young lady is having a bad day. She lost a leg, she lost a hand, and someone slit her throat.
There were several vehicles on display. One was the Riverside County Sheriff’s command center. It was awesome. There were also armored vehicles. They were really cool. And there were police motorcycles.
The Riverside County Sheriff’s Mobile Command Post. It is impressive.An armored vehicle with a battering ram. Check out the gun port on the right door.Good buddy Mike peeking through the gunport.
Harley and BMW were the only two police motorcycle suppliers in attendance (which is probably fitting, as they are the only two gasoline-powered motorcycle manufacturers selling to US police departments). Mike and I both sat on the Harley. Its weight (840 pounds) could only be described as oppressive. I guess I’ve grown weaker in my old age. I could barely get the thing off the side stand. I’ve owned a couple of Harley full dressers. No more, though. For a lot of reasons, my Harley days are in the rearview mirror.
Mike on the police Harley. We both agreed: It’s a porker.
The Kawasaki KZ1000P, an iconic police motor if ever there was one, went out of production at least 20 years ago. But there was a pristine one on display. It was in a booth advertising communications equipment, and that company used it to showcase the early police comm equipment they used to manufacture. The Kawasaki (although it was 20 years old) was immaculate, as it should be. The odometer showed only 5 miles. Mike and I were both impressed. I would like to own this bike.
Yours truly with the no-longer-manufactured KZ1000P Kawasaki.The real deal, with just 5.3 miles on the odometer.
There was a company displaying an artistic Lucite arrangement lit up. It was interesting. I can’t remember who the company was, so I guessed it bombed as an advertisement, but it was cool. In the photo below, it shows Federal Signal. I’m not sure what they do. But if I ever needed a Lucite car bit of artwork, they would be my guys.
A Lucite car.
The United States Secret Service had what was probably the most interesting exhibit. It was one of the President’s Chevy Suburbans, complete with the presidential insignia and flag. I sat in the rear seat. There were real Secret Service agents there and they were nice guys. We joked with them a bit about taking care of Old Joe, because we sure didn’t want Kamala in the White House. They tried not to laugh, but I sensed strong agreement.
Hail to the Chief! The window glass on this SUV is at least an inch thick.
Boston Dynamics was there with a couple of their robotic dogs. You might have heard of Boston Dynamics. They were featured on 60 Minutes (the television show) a couple of years ago. The robotic dogs were cool. There was a real police dog there, too. It was not sure what to make of the robots.
One of the exhibits had a large table full of counterfeit $100 bill bundles. This was another cool exhibit that I have no idea what they were selling. But it was cool and it made for a couple of cool photos.
Money money money. I’m not sure what these guys were selling.Thumbing through a stack of hundred dollar bills.
One of the great things about these kinds of conventions are the goodies. Many of the exhibitors had bags (mine was from Blauer), and nearly all the booths had goodies. I was a grownup playing trick or treat, and I didn’t even need to wear a costume. Ordinarily, I don’t pick up much in the way of goodies at trade shows, but I have four grandchildren now and I was scooping it all up for them. At least that’s my story, and I’m sticking with it. I will tell you I won’t need to buy another pen for probably another 50 years.
The goodies bag. It was heavy by the end of the day. The grandkids will be pleased.
Mike and I had a super time wandering around in the IACP convention. So much so, in fact, that we reached the end of the day without eating lunch (and for me, that’s unusual). That was okay, because it made us look forward to dinner as we left the convention. As always, the dining in San Diego was superior. Whenever Sue and I visit another city, we don’t go to the touristy restaurants; we always search for the local favorites (and Sue does a stellar job in finding these). Valero’s got the nod our first night in town; it’s a small, family run Italian restaurant, and it was excellent. I had eggplant parmigiana, Sue had angel hair pasta with pesto sauce and mushrooms, and Mike had the pasta puttanesco. I’d never heard of that last one and when Mike translated the name to English I didn’t believe him initially, but he was right. I’ll have to try that one on our next visit. And there will be a next visit. Valero’s was outstanding.
Eggplant parmigiana that tasted as good as it looks.Angel hair with pesto sauce and mushrooms. It was awesome, too.Pasta puttanesca. It’s on the list for the next visit. Mike enjoyed it.
Our second night in town brought us to the Havana Grill, a Cuban restaurant not far from Old Town San Diego. It, too, was a local favorite and it was excellent.
Picadillo, which is beef seasoned with onions, peppers, garlic, olives, and raisins. I had it for dinner and it was fantastic.
So there you have it: A great visit with good buddy Mike, a super time at the International Association of Chiefs of Police Convention, and a great couple of days in San Diego.
I visited with good buddy TJ of TJ’s Custom Gunworks a few days ago. I’m having TJ work on my Smith and Wesson Shield (we’ll post that story in a future blog). While I was there we talked about the poor trigger pull inherent to striker-fired pistols, and TJ mentioned his custom Glock. He showed it to me and I was blown away. It is beautiful. I’ve seen custom Glocks before, but nothing like the pistol you see here. This one is in a class all by itself.
TJ calls this pistol the Rock Glock for good reason: Check out the granite-speckled, multi-color Dura-Coat finish. The pictures are good, but they don’t do the gun justice. In person, it is visually arresting. Stunning. Beautiful. There are probably more adjectives I could use, but you get the idea.
TJ’s Glock started life as a Glock 22. Here’s a partial list of the custom features TJ incorporated:
Custom Glock 34 9mm slide
Match barrel with MWG compensator
Double-textured grip stippling on the front strap and trigger guard
Custom contoured slide release (it provides a much easier lock and release)
Extended magazine release
Doctor red dot optical sight-scope
Custom Overwatch aluminum trigger
Match connector
Full action and reliability work
Like all of TJ’s custom handguns, this one is not simply a collection of drop in off the shelf custom parts. TJ does a full customize, fit, and polish on everything (the custom parts and the mating Glock components). The Rock Glock is old world craftsmanship applied to modern weaponry. The man is a perfectionist and it shows in everything he does. It’s what keeps me coming back to TJ when I need (or want) custom work done on my handguns.
Please click on the popup ads…it’s what keeps the content coming!
Interestingly, TJ kept the factory Glock striker (the firing pin) in the Rock Glock. He finds them to be much better made than aftermarket strikers. Kudos to Glock on that.
Check out the grip area (both front and back) and the trigger guard. They are deeply stippled to assure a rock-solid, zero slip grip.
One of TJ’s purposes on any project is to assure absolute reliability. That’s not hype. I’ve experienced it with all the guns TJ’s modified for me. Part of that includes recontouring and polishing the feed ramp on semi-auto handguns. Check out TJ’s touches on the Rock Glock’s feed ramp.
TJ let me dry fire the Rock Glock and I was impressed. He told me that the stock gun had a 6.5-pound trigger pull and it was rough. The Rock Glock now has a 3-pound trigger pull and it is buttery smooth.
It was a good visit and I’m eager to get my Shield after TJ works his magic on it. You’ll get the full report here on ExNotes when I do.
The Smith and Wesson Model 59. Mine is a very early one, with a serial number that puts it in the first year of production. These old guns can shoot!
Dial back the clock a cool 46 years (which would put us in 1972), and Smith and Wesson had only recently introduced its Model 59 9mm, double-stack, semi-auto handgun. The 59 was the latest and the greatest in ‘72…a high capacity 9mm with a double stack magazine (like the Browning Hi-Power, the only other gun of its day with this feature) and a double-action first shot (pulling the trigger both cocked and fired the weapon). It was cool. Nah, scratch that. It was super cool.
I first became acquainted with S&W semi-autos with their Model 39, the predecessor to the Model 59. Dick Larsen, a family friend, had a Model 39. Sergeant Larsen was on our local PD and to me he defined cool. I really looked up to Larsen and I loved talking guns with him. In one such discussion the conversation turned to the topic of the day: 9mm handguns versus the venerable .357 magnum revolver. I thought Larsen was a dyed-in-the-wool revolver man, until he showed me his off-duty Model 39. He had it on his belt under a Hawaiian print shirt. It was a cool thing…small and light. I wanted one. “The one to get today is the Model 59,” the good Sergeant said, “if you can find one.”
The Model 59 was a new limited-production item from Smith and Wesson in 1972, and they were tough to get. Rumor has it that S&W developed the 59 for the Navy SEALS (nobody outside S&W and the Navy knew this back then). That’s probably why they were so hard to get initially; nearly all the production was headed to Coronado Island. I was going in the Army and after that conversation with Sergeant Larsen, I wanted a Model 59. In those days, if you wanted to find a hard-to-get gun you either made a lot of phone calls or you visited a lot of gun shops (the Internet and Gunbroker.com did not yet exist). My Dad did both (plus, as a world-class trapshooter, he knew people). I got lucky. Dad found a distributer who could get a Model 59, and I had one before I shipped out for Korea.
I’ve had my Model 59 since 1973, and I’m guessing I’ve probably put something north of 30,000 rounds downrange with it. In my early days, I replaced the black plastic grips with cool tiger-striped exotic wood grips I bought at a Fort Worth gun show (who would want a gun with black plastic parts?), and I had to replace the safety once back in the ‘80s. Other than that, all I’ve done with my Model 59 is shoot the hell out of it and occasionally clean it. It’s surprisingly accurate, it feeds anything, and it’s just plain fun to shoot. It’s a gun I’ll never sell.
Zombies don’t stand a chance against the Model 59. My favorite 9mm load in the 59 is a 125 gr cast roundnose bullet over a max load of Unique propellant.
The good news is the Model 59 ultimately went into high rate production. More than a few police departments chose the 59 when the migration from revolvers to autos occurred in the 1980s. All of those PDs moved on to newer guns, and today you can still find used Model 59s for cheap.
Most folks today have either never heard of the Model 59, or they would smile quaintly at its mention and then tell you how great their plastic Glocks are. But don’t dismiss the Model 59. The 59 is a grand old handgun and I’ll bet you a dollar to a donut you’d love it. Mine just gets better with age (like a fine wine, I guess), and I love shooting it.
