ExNotes Review: Arnold

By Joe Berk

Susie and I were channel surfing on Netflix a few nights ago and a new documentary popped up:  Arnold.

Arnold is a three part series (one hour each) documentary on the life and times of our former governor and my all-time favorite actor, Arnold Schwarzenegger.  The series was very well done, it is told by Arnold himself (interspersed with comments by folks who figured prominently in his life, including James Cameron, Danny DeVito, and others), and in a word, it was great.  The three segments cover the Governator’s early life and body building career, his movie career, and his stint as governor of California.  The show doesn’t pull any punches, and the last segment includes the affair with his housekeeper and the son he had with her.

I’d heard of Arnold Schwarzenegger and sort of had a vague idea that he was a movie star/body builder before the movie Terminator was released.  When I saw Terminator and Terminator II and I thought he was great in both.  Then I saw Predator, and I liked him even more.  I watched (or rented the VHS tape back in those days) of just about everything he’s ever done.  When Arnold ran for governor of California, he had my vote both times.  I’m a fan.  I like the guy.

If you are a Netflix subscriber, queue up and watch Arnold.  You’ll like it.

The Rimfire Series: GSG 1911

By Joe Berk

A few years ago I was in a local Turner’s sporting goods store (Turner’s is a big sporting goods chain in the southwestern US) and they had a sale on GSG .22 LR 1911s.  I think I paid $229 for it and I’ll admit it:  The GSG was an impulse buy.  I didn’t need it, but for $229 I thought any kind of 1911 would not be a mistake (I just checked the Turner’s website and they are now $379.99; that’s still not bad).  I put the gun in the safe when I bought it and pretty much forgot about it.

The GSG .22 1911. All the controls are the same as a real 1911. Note the competition/target-style hammer, the extended beavertail grip safety, the target-style trigger, and the Patridge-style front sight.

I had owned the GSG .22 for several years and I hadn’t fired it.  Then, one fine recent morning when I was putting my 9mm 1911 in the range bag, I realized it was dumb not to shoot the little .22.  It’s not like it’s ever going to be a collectible, so I thought I might have some fun and enjoy it.  The GSG went into the bag, too, for its first firing session.

To my surprise, the GSG is surprisingly accurate and it is fun to shoot.  The feel is just like a real 1911 except it’s a bit lighter (as near as I can tell, the exterior dimensions are identical to a full-sized 1911). The trigger is a little on the heavy side (especially after shooting my TJ-modified 9mm Springfield Armory 1911 with its 2 1/2-pound trigger), but the GSG trigger is creep free.

As you can see on the target above (at the top of this blog), the GSG shot slightly to the left.  I could see on the slide that the rear sight it was not centered.  I fixed that.  The rear sight is drift adjustable (it’s held in place with a setscrew), so I moved it a scosh to the right.

The GSG has decent whitish/yellowish (almost aged ivory in color) dot sights front and rear.  About that target above:  It’s a box of 50 Aguila .22 target loads at 10 yards, with a two-hand hold, firing offhand.  I have no excuse for the two outside the 10-ring.

The front sight. I’m sure it’s plastic, but the dot has the appearance of aged ivory. It’s dovetail mounted, and it appears to have a set screw retainer.
The rear sight, with the same faux ivory dots. The sights are good. As delivered (and as you can see in this photo) the rear sight is biased slightly to the left. The GSG shot a little to the left for me. I may move the sight over to the right a little bit.
The business end. I haven’t taken the gun apart to clean it yet. There appears to be zero bore leading after firing that first box of 50 rounds.
The boiler room after 50 rounds. There were no extraction failures. I had one stovepipe, but the gun is brand new. I hadn’t even oiled it before taking the little GSG to the range.
The grips appear to be some kind of plastic. That’s okay; I have a brand new set of diamond-checkered Springfield Armory 1911 Cocobolo grips I’ll use as replacements.

There’s a fair amount of plastic on this gun and I think the finish is some kind of paint, but the gun looks and feels good.  The GSG is not a Wilson or a Les Baer 1911, but it doesn’t cost $3500, either.

I don’t know how the GSG takes down or what it looks like inside.  I suppose it’s time to read the instructions, and I need to do that so I can clean it.  Watch for more on this fun little 1911.  You’ll see it right here on our Rimfire Series of blogs.  Don’t forget to check out our other gun and reloading articles, which are indexed for your convenience on our Tales of the Gun page.


A quick edit:  I took the grips that split on my Springfield Armory 9mm 1911, superglued them back together, and installed them on the GSG .22 (I had to relieve the safety cutout on the right grip to get them to fit).   The Springfield grips look good, and they feel better than the injection molded plastic grips than came on the GSG.  I had the GSG on the range a couple of days ago and I sent a quick 100 rounds downrange.

The GSG now shoots very slightly to the right, but I’m going to leave it alone until I try the next batch of ammo (I ran out of the Federal ammo you see above). The GSG is 100% reliable with high velocity .22 ammo; it experiences an occasional failure to fully cycle with standard velocity ammo.

Never miss an ExNotes blog: