I’ve mentioned my Casio Marlin (also known as the Duro) a few times in previous blogs. I love this watch for any number of reasons: It’s accurate, it’s rugged, it’s waterproof, it’s comfortable, and it’s inexpensive. It’s a diver’s watch, but I’m not a diver. I just like the look of thing. I’ve worn it on a few big moto trips including the ride around the Andes Mountains in Colombia. It poured cats and dogs on that trip. The Marlin was unfazed.
At about $50, this watch has to be the deal of the century. Just for grins I grabbed a picture of the Rolex Sea Dweller and put it along side the Casio. If you own a Rolex don’t get your shorts in a knot ((I own one, too). But the comparison has to make you wonder: Let’s see, $50 for the Casio and $16,500 (or whatever it is these days) for the Sea Dweller (if you can find one and in today’s market that’s not easy). As Aristotle would say….hmmmmm.
Yeah, you can go a little deeper with the Rolex (they say down to 3,900 meters). My Casio says it’s good for 200 meters. That’s over 600 feet down. It’s not likely I’ll ever visit those regions and if I ever do I can guarantee you the time of day is not what will be on my mind.
I’ve owned my Marlin for about 10 years now. I think I’ve had to replace the battery twice. My guy charges me $3.25 to install a new battery (parts and labor). The strap got stiff and cracked, so I’ve replaced that once (I think it was $10). I checked and the cost of a replacement resin Rolex band is close to $300. On the other hand, the Rolex is self-winding, so it never needs a battery. Again….hmmmm.
You know what to do…click on the popup ads!
On that comfort thing…the Casio Marlin is about the right size for a man’s watch and the resin band is very comfortable. I always forget I have it on and on more than a few occasions I’ve gone into the water wearing it (swimming, showering, and most recently, almost being swept away in my Subaru going to the gun club). It doesn’t matter to the Casio. I’d say it’s indestructable, but some Internet weenie would want to get into a urinating contest about that.
Boarding the ferry in Magangué on the Magdelena River. Even there, the Casio’s good looks and functionality appealed to an onlooker.
When I rode Colombia with Juan and Carlos, one time we had to wait a couple of hours on a hot and humid afternoon for the ferry to come in and carry us down the Magdalena River to Mompos. While we were waiting in what little shade we could find in Magangué, a young Colombian boy came over and touched the Casio, nodding his approval. If I had another watch with me I would have given it to him. I still think about that on occasion and wish I had given it to that kid. I think when I bought my Marlin, they were $39. That young fellow most likely would have cherished the Casio the rest of his life (as I will). Maybe I need another ride in Colombia. If I go again I’ll throw an extra Marlin in one of the panniers. You know, just to be prepared.
That’s me, age 15, in the photo above. I’m on my Dad’s Honda Super Hawk, and no, I wasn’t getting ready to do my best impression of Rollie Free or Walt Fulton (even though I was apparently wearing the same swim trunks as ol’ Rollie). I wasn’t getting ready for a high speed run at all…it was summer, and we spent a lot of time in the water in those days. And when Dad said it was okay (and sometimes when he didn’t), I rode the Super Hawk in the fields behind our house.
We didn’t know as much about photography back in the mid-’60s. But you get the idea. That Super Hawk was a lot of fun. That’s me in the summer of 1966.Rollie Free at Bonneville in 1948, on his way to a romping 150.313 mph land speed record. Check out the swim trunks.Walt Fulton breaking 100 mph in 1952 at El Mirage, California, on a Mustang motorcycle.
The Honda fascination started with me as a 13-year-old kid. We weren’t motorcycle people. Yet. I was mesmerized by a ’64 Triumph 500cc Tiger a guy at school owned. That started a slew of snail mail requests to the motorcycle companies (snail mail was all we had back then, but we never felt communications deprived), and pretty soon I had a collection of moto sales literature. Dad started looking at it. Then we saw a Honda Dream at a McDonald’s (I wrote about that a few blogs back). A short while later, Dad’s trapshooting buddy Cliff Leutholt (one of those nicest people who rode a Honda) visited us on his Super Hawk. Jet black, chrome, silver paint, twin carbs, electric start, it was stunning. Cliff said it was good for 100 mph. Dad rode it (a first for my father) and he was hooked. The 1960s were good times.
Me, with Dad’s CB 160, in February 1966. No snow, but it was cold that time of year in New Jersey.
The bug bit hard. Dad started looking at the classifieds (remember those?), and in 1965, he bought the Baby Super Hawk, a scaled down, 160cc version of the 305. Dad owned that bike for only a few months, and then he traded it in on a Super Hawk. Sherm Cooper (of Cooper’s Cycle Ranch) offered Dad $450 for the 160 against the Super Hawk’s $730 (it was $50 more than Dad had paid for the 160), and just like that, we had a Super Hawk. Boy, that was a blast.
Hey, help us out…do a friend a favor…please click on the popup ads!
The Honda Super Hawk emerged from a vibrant and dazzlingly successful Honda Motor Company. Honda first brought its motorcycles to the US in 1959, and, well, you know the rest. 1961 saw the creation of the 250cc Honda Hawk, which quickly evolved into the Super Hawk. The Super Hawk bumped displacement to 305cc, and its 180-degree parallel twin was good for 28 horsepower at 9200 rpm (unheard of engine speeds back in the early 1960s). The Hondas had 12-volt electrics, twin 26 mm Keihin carbs, a single overhead cam, a 4-speed transmission, and a wet sump lubrication system.
Like the Honda Dream in our recent blog, the Super Hawk had an electric starter, along with a kickstarter that oddly rotated forward (it was hard to look like Marlon Brando kick starting a Super Hawk, but I did my best). The instrumentation was a cool touch. Instead of the more conventional (i.e., British) separate cans for the tach and the speedo, both were contained in a single panel atop the headlight. The Super Hawk had a tubular steel frame and front forks, but no front frame downtube (the engine was a stressed member). The electric starter occupied the space where front downtube would be. It was a clever engineering solution and that electric starter made life easier, but the Super Hawk didn’t look as cool as the 305cc CL 77 Scrambler (more on the Scrambler in a future blog).
The Super Hawk was a runner. A road test in Cycle World magazine had the top speed at 104.6 mph and the bike ran a respectable 16.8-second quarter mile at 83 mph. Super Hawks had twin leading shoe front brakes (something special in the pre-disk-brake era). The motorcycle weighed 335 pounds. The Super Hawk could be had in the same blue, black, white, or red color choices as the Honda Dreams, but unlike the Dream, all the Super Hawks had silver frames, side covers, and fenders. I remember that nearly all Super Hawks were black; it was very unusual to see one in any other color unless you were an Elvis fan.
Click on the image to watch the video.
The Super Hawk had good starring roles, too, before product placement became the mega-industry it is today. There were pop songs about Hondas. Elvis Presley rode a red Honda Super Hawk in the 1964 movie Roustabout. And a fellow named Robert Pirsig rode across the US on one with his son and wrote a book about it (Zen and the Art of Motorcycle Maintenance); that book has become something of a bible in the travelogue and motorcycle deep think genres. Pirsig’s Super Hawk currently resides in the Smithsonian.
So, back to my early days and my turning Dad into a rider: As awesome as the Super Hawk was, it didn’t last long. The progression back in those days was a small Honda, a bigger Honda, and then (before the advent of the Honda CB 750 Four), a jump to a Triumph or BSA. Dad had been bitten by the bug big time, and in 1966, he bought a new Triumph Bonneville. But that’s a story for another blog.
I’ve been so busy with home-nesting projects my motorcycles have succumbed to time’s crumbling embrace. I parked the ZRX1100 Kawasaki after the carburetors clogged up and it began running on three cylinders. Since it has been sitting a few years naturally the brake pistons seized. Followed by fluid leaking out of the calipers. Followed by me robbing the battery to start the generator that powers the nest. In any event, it needed tires, a chain and sprockets and the throttle cable repaired. So the big green Eddie Lawson lookalike has suffered the indignity of being dragged across the countryside on a two-hundred-dollar Harbor Freight trailer.
Even worse, the mini bike my pops built for me when I was a wee lad is on the injured reserve list. Forty-eight years idle, Mini has untold issues although the Briggs and Stratton engine still turns over. I’ve lost a few critical, hand-made parts and since the Old Man has shuffled off I’ll have to re-make the stuff myself. It’s not easy handling such a precious thing. The mini is lousy with my father’s engineering and artistic skills. The welds and frame geometry are a direct, tangible link to happy times working together in the garage.
The 1965 Honda 50cc went under water in one of Florida’s many hurricanes so I took it apart and threw everything into boxes and plastic tubs. It’s been apart so long the tubs have crystalized into the finest, most fragile parts bins in existence. The slightest touch turns them to dust. Dry, chalky plastic oxide mingles with 4mm JIC screws and yellowed wings. The sheet-metal swing arm rusted completely in half so I’ll have to rig something in aluminum to secure the rear wheel to the frame and lower shock eyes. I do have a good engine for the Honda: a fire breathing 140cc Lifan clone that clears the front fender by a quarter-inch.
The newest dead-bike I own is a Husqvarna. On the last, long-ish motorcycle ride I took to Big Bend Park way down in south Texas the Husqvarna SMR510 lost its clutch release. Bit by bit, little by little the clutch action faded away until finally pulling the clutch lever had no effect on events. The headlight also broke off but on a dirt bike that’s hardly worth mentioning. We were doing some trail riding down there and the Husky did ok shifting motocross style. Starting out was the main problem as you had to push the thing, jump on, and pop it into first. The bike would either stall or roar off on a wheelie. On the ride home I would circle the backfield waiting for traffic lights to change. Sorry, everyone in El Paso.
At least the Z1 Kawasaki never ran for me. I bought it from the owner of the property we now live on. I had to get it out of there because things were disappearing and I felt someone was going to pilfer the Z before I could. The Z needs all sorts of stuff but I get the feeling this bike will be a keeper. The lines are so clean and simple compared to modern bikes. It sits damn near perfect, doesn’t feel heavy and I know from following David Howell through the Everglades, Z’s do well in the dirt.
Which leaves us with the only motorcycle I own that works: a 360cc, 1971 Yamaha RT1B. Fondly known as Godzilla to dirt riders far and wide, the old Yamaha just keeps popping along. Analog everything, smoky, noisy, sweating petroleum from every pore, this is the bike that will not die. Even with me maintaining it.
Everything around us is constantly falling apart. Even the Great Pyramid in Egypt will be a sand dune one day. I just hope that when it finally falls to the ground replacement parts will still be available on Ebay.
Help us keep the lights on…please click on the popup ads!
Do you ever have those moments when you wake up unsure of where you are? I awoke to the sound of birds, more specifically, parrots, and the smell of fresh tortillas and knew instantly that this was not home; I was in Baja in Mulege and wholly smitten with my room with her stone walls, comfy bed, and protective mosquito netting. I didn’t want to get out of bed until I remembered that I had made plans to go horseback riding to the bay.
Keep us going…please click on the popup ads!
Throwing on my clothes and double-timing it to the restaurant, I had just enough time for a cup of coffee and water before my guide arrived to take me to the ranch, which was less of a ranch and more of a lean-to along the highway with both our horses tied and already saddled. I met my girl for the day, Lupita. She had enough spunk to whinny at our arrival and appreciate the carrots I brought to help form this new friendship. Our saddlebag were loaded with swimwear and lunch, and we set off for a leisurely ride to the bay.
Horseback riding in the Sea of Cortez.
Muscle memory took over from riding horses in my youth, and I gave in to the morning’s joy and the view of Conception Bay. Riding down the beach at a slow gallop letting our horses have their lead and finding a bit of shade, we stopped for an early lunch of fresh fruit, good tequila, and some freshly made empanadas. After lunch, I asked if I could take off the saddle and ride bareback, something I had not done since childhood. It seemed a perfect idea for this glorious morning. Surprisingly my guide said yes and permitted me to ride Lupita bareback into the bay to enjoy a good swim. I had forgotten the thrill of entering a body of water on horseback; Lupita seemed to enjoy the experience as she left the security of the ocean bottom and took us further out into the bay. The morning flew by and soon it was time to return to the beach and make our way back to the corral.
Sunrise on the Rio Mulege.A river runs through it…the Rio Mulege in Mulege.
Returning to Historica Casita in the heat of the early afternoon, I did what any sensible local would do. I retreated to the coolness of my room for a proper afternoon siesta. After a cold shower and fresh clothes, I headed out to explore. With the help of a newfound local friend and a Google search, I learned that the Mulege indigenous population has a long and rich history that dates back centuries. It is believed that the region’s first inhabitants were hunter-gatherers who lived in small bands, but the arrival of the Mission changed their lives forever. Spanish missionaries established the mission in 1730, teaching the local population how to farm and build adobe structures and simple homes. I was also happy to learn there has been an effort to preserve their history by preserving ancient artifacts and teaching younger generations about their heritage.
The Mission in Mulege.
While the Mission was closed, I could still walk the grounds and view the river from the vantage point of the Mission, as it is built on one of the highest points in Mulege. Wandering back down the hill, I walked the river’s edge, exploring the town and the small community of locals and ex-pats. As I made my way back to the hotel, I realized how hungry I was and looked forward to an evening in the hotel courtyard, a good dinner, and a freshly squeezed margarita. The evening did not disappoint as I sat visiting with locals and a young family visiting from the mainland. Soon I was off to bed with the promise of an early rise and the chance to explore the many beaches along Conception Bay.
Sunrise on the Sea of Cortez.A fine Mulege breakfast.
The following day I was back on my bike and headed towards my next stop, Playa Santispac, a short 25 kilometers south on Highway 1. I knew I only had a few hours before the oppressive heat and humidity would force me back to the room, and I was determined to make the most of the day. Cresting the ridge, I was overlooking the bay with her teal-colored water inviting a closer look. Santispac beach has a restaurant and several palapas stationed along the beach; as I rode my bike down the beach, I decided a swim was in order, followed by a hearty breakfast at the modest beachside restaurant.
An overlanding rig.My BMW on a beach in Mexico.
Swim and breakfast completed, I headed further south, stopping at each beach I passed and settling on what has become one of my favorite beaches, Playa el Requeson. The white sand and sand spit at low tide, taking you to a small island, was more than I could resist. Setting up my camp chair, I soon made friends with an overlander couple from England. Borrowing their snorkeling gear I enjoyed a quick swim out to the island, enjoying the starfish and rockfish along the shore. I reluctantly returned for one last night in Mulege with a new plan for the following day, to ride to Loreto for lunch and then return to Playa el Requeson to camp for two nights.
Loreto’s Malecon.Loreto has a rich history.
Loreto has a rich history that dates back to the 16th century when Spanish missionaries established the first mission in the area. Indigenous people then populated the area, and over time, it became an important fishing port for the region. Today Loreto is a popular tourist destination complete with a Malecon along her waterfront. Loreto has an historic town square with a well-preserved mission and museum. With a population of around 25,000, finding lodging at every price point is easy, as are the town’s many services.
The Loreto Mission.
After a lovely day sightseeing, I headed about an hour and a half back north to Playa el Requeson to find a bit of shade and a good place for my tent. The afternoon was blazing hot as I headed inland along Hwy 1, as I once again cursed myself for selecting June to make this ride. Complaining aside, I arrived and indulged in a long swim to take the sting out of the day’s heat. I found my new friends in the overlanding vehicle who gave me the gift of a cold drink with ice and offered the shade of their massive vehicle to pitch my tent. The day gave way to a glorious sunset, and soon, we had a modest fire complete with fresh fish for dinner. With a million stars out for our pleasure, full bellies, and the delight of margaritas on the beach, the night was spent with storytelling of our past adventures. Both Stephen and Shelly’s stories surpassed mine as they shared their adventures traveling through three continents over the past several years.
The two days camping on the beach flew by, and it was sadly time to make my way back north. I planned to head to San Felipe, but the reality of the heat made heading back to the Pacific side an easy choice. Retracing my ride through Baja allowed me to revisit a few of my favorite places and discover a few new ones to ensure this would not be my last ride there!
Half a lifetime ago I was a yuppie, and the symbols of being a successful yuppie included an MBA and a Rolex. The Rolex was easy (the only requirement was having more money than brains). The MBA was more difficult. It required going back to school, which I did. Getting the MBA definitely gave me a boost. My career at the munitions company was on fast forward; at one point I was the youngest vice president in the Aerojet corporation (then I got fired, but that’s a story for another time). I loved being in the bomb business (business was booming, so to speak), and being a former Army guy, I was in my element.
That could have been me in the ’80s and ’90s. I wore a jacket and tie to work every day. I had the big glasses, too.
Anyway, while I was going to night school for the MBA, one of my classes was titled Human Behavior or something like that. The guy who taught it was a Ph.D in one of the soft sciences, and I knew pretty quickly that he leaned way left. That’s okay; in my book you can lean however you want as long as you don’t expect me to agree with you on every issue.
The first night of class the prof had everyone tell the rest of their class their name and what they did. We were all yuppies, we were all young, and we all had good jobs. It made for good entertainment, but I had a feel for how things were going from the first several yuppies who told us what they did and the prof’s reactions and questions. Yep, the guy was a definite leftie. I started to wonder what his reaction would be to me…a guy firmly entrenched in the military industrial complex working for a munitions company.
“So what do you do, Joe?” Dr. WhatsHisName asked.
“Uh, I’m an engineer,” I said, hoping he would leave it at that, but knowing he wouldn’t.
“What kind of an engineer are you, and who do you work for?”
“Uh, I’m a mechanical engineer,” I said. No sense in oversharing, I figured. Maybe he wouldn’t notice I didn’t name my company.
“Who do you work for?”
“I work for an aerospace company.”
“What company, and what do you engineer?” This guy wasn’t going to give up. I liked my job and I liked what I did, but I wasn’t about to tell Jerry Rubin here I supported the Vietnam War.
“I work for Aerojet, and we make a variety of products.” It had become a contest, and I was losing.
“What are your products?” He had me. Time to ‘fess up.
“I do cluster bombs.” There. It was out. I knew the guy was going to call whoever it is you call when you find someone violating the Geneva Convention. The good doctor stared at me for several seconds. The other 30 or so yuppies in the class were dead silent. It was a pregnant pause if ever there was one and we were pretty close to the 9-month mark. Somebody’s water was about to break.
“Does your family know what you do?” he softly asked, speaking almost in a whisper.
“My wife does,” I said, mirroring his subdued tone.
“And how does she feel about how you earn a living?”
At this point, I knew I had to come clean. “Truth be told, Professor, she’s disappointed in me.” I had hoped that would end the discussion, but the guy would not let up. He was a dog and I was the bone. Then I sensed a way out, anticipating what his next question would be.
“What does she say to you?” he asked.
“Well, Doc, like I said, she’s disappointed, and she’s made that known on several occasions.” The good Professor was nodding knowingly. He was hearing my confession. I don’t recall specifically, but I’m pretty sure he was smiling. I was on a roll and I continued. “You see, Professor, my wife works for TRW’s Ballistic Missiles Division. They do nuclear intercontinental missiles and she’s always asking me why I’m wasting my time screwing around with conventional weapons. If you’re going to go, she always says, go big. Go nuclear.”
My yuppie classmates started laughing. Me, I was scared. I was running a perfect 4.00 grade point average in the MBA program up to that point, and I thought I had just blown any chance of aceing this course. The professor nodded without expression, made a note on his pad, and went on to the next yuppie. My being a wiseass had earned a good laugh, but that note he made couldn’t have been a good thing and I was afraid it would cost me.
So how did it turn out? I busted my chops in that course and I got my A. But I was sweating bullets for the rest of the term. Little, non-nuclear bullets, but bullets nonetheless. More importantly, the cluster bombs I helped engineer won the Gulf War a few years later in 1991. Most of Saddam Hussein’s Republican Guard tanks were taken out with CBU-87/B cluster bombs and GAU-8/A 30mm ammo (and my company, Aerojet Ordnance, also made the ammo for those A-10 Gatlings). Sometimes when studying human behavior, the guys who know (I mean, really know) reach the only conclusion and solution possible: An adequate quantity of high explosives delivered on target. I’m not at all embarrassed about having had a hand in that. Fact is, I’m proud of it.
In Part 1 I shared with you my adventure from Sedona, AZ, crossing the border for the first time on a bike, and heading down Mexico’s Transpeninsular Highway to Guerrero Negro. This blog continues the adventure.
After an early morning departure leaving behind the comforts of the Hotel Mision Cataviña, I continued on Highway 1, enjoying a quiet morning and the rare good luck of an empty road. Settling into the ride with a deep breath that allowed me to loosen my tight muscles after two long days of riding, I felt the joy start to creep in as I took in the vastness and emptiness of the Sonoran Desert. The fierceness of the summer sun had already begun turning the winter greenness to a light wheat color. This did not diminish the stark beauty of her desert, with the surrounding hills in the distance with their deep purple shadows demanding a second look. My bike was doing great; her little single-cylinder engine was a gem off-road and could manage up to 80 miles an hour, more than enough in Baja. She was a perfect bike for the moment, made for Baja.
The desert south of Cataviña.
Rolling down into Villa Jesus Maria I was more than ready for a break, something cold to drink and some much-needed gasoline. I did well with the drink and break, but as can happen in Baja, the Pemex had no gas. It was another 40 kilometers to Guerrero Negro; as I emptied my MSR liter of gas into my tank, I said a little prayer to both Jesus and Maria to extend my range to Guerrero Negro.
In the Guerrero Negro salt flats.At Scammon’s Lagoon in Guerrero Negro.
Prayers answered, by perhaps both Jesus and Maria, I arrived with a smidgin of gas fumes left in my tank. Reaching Hotel Don Gus, which several riders had recommended as both affordable and bike safe, I pulled into the dirt parking lot to check in. This is a typical motel-style lodging with comfortable rooms and a simple restaurant serving hearty portions. My room settled, I headed for a taco truck that every rider raves about, Tony’s Fish Tacos. Let me tell you, I often dream of Tony’s fish and shrimp tacos with the perfect batter and lime crema!
Keep us going…please click on the popup ads!
Fully satisfied and with still enough daylight left, I went to explore the salt flats famous in this area. A short ride from town, the salt flats looked like a mirage at times, fooling the eye into believing it was a vast lake. This soon gave way to the commercial operation with magnificent mounds of salt with trucks and bulldozers on the top of the salt hill so high that the trucks looked like toys. Soon I was passing the small boat dock and positioned my bike for a good pic. The sun was warm but blissfully not hot with the Pacific breeze. I set up my small camp chair, pulled out a flask filled with an excellent local Vino Tinto, and gave a silent toast to a perfect Baja day.
A Don Gus Hotel selfie.
I woke the following day with growing excitement, and unable to wait for daybreak I loaded my bike impatiently, waiting for the restaurant to open for a much-needed cup of joe. You will often find that opening and closing times in Baja are more of a suggestion than a hard rule. A half-hour later, I was in my room, firing up my rocket pocket stove and making do with a Starbucks instant coffee and some leftover tortillas. Bike ready and stomach full, I headed to the gas station to fill up Red, only to find I had caused a stir and was noticed by a few locals who wanted to meet the female American solo rider. A few of the younger ones asked what seemed like endless questions, wanting to know where I had been and where I was going. This completed, I was on the road heading to the part of Baja I had been waiting for, Mulege and the famous Bahia Conception.
The road out of town was uneventful, an endlessly flat straight that challenged me to stay awake and focused. About an hour later, I passed the midsize town of Villa Alberto with plenty of gas, shopping, and lodging. I stopped long enough for gas and was back on the road. My interest in the highway picked up as I neared San Ignacio. A few kilometers before San Ignacio there was another military stop, which was uneventful other than the guard looking at me, my bike, and a long look down the road with was becoming the norm question and answer: Solo? Si Solo! With an astonished look, he waved me on, wishing me a safe ride. My next stop was a visit to the Baja 1000 popular pit stop, Rice and Beans, a restaurant and hotel just off the highway with good food and cold beer. I left satisfied and headed to the main square of San Ignacio.
Inside the Rice and Beans Restaurant in San Ignacio.
The town of San Ignacio is a true desert oasis with more palm trees than you could count and a river running through the town. San Ignacio seems caught in a time warp as elderly men sit in the shade of the massive trees that frame the small-town square, reading and playing cards as they eye me parking my bike. Curious about this gem, I found just enough cell coverage to look up her history. San Ignacio was founded in 1706 by the Cochimi tribe. In 1728, missionary Juan Bautista de Luyando discovered San Ignacio and committed to building Misión San Ignacio Kadakaamán. The building is made of volcanic rock from the nearby mountains. Her mission sits quietly, waiting for the next visitor, and I was lucky to find her open and welcoming.
The San Ignacio Mission.San Ignacio’s town square.A restaurant in San Ignacio.
I reluctantly got back on my bike, heading back to the highway with a promise that I would return to San Ignacio for further exploration and to enjoy her peaceful river and nearby lagoon. With one more top off of gas, I headed down the road finding the excitement of endless twisties and, on the horizon to my left, the peaks of Tres Virgenes. One last climb took me to another peak, with soon a sweeping view of the Sea of Cortez. Massive winds kept me alert. The heat was near overwhelming, and the wind only accelerated my dehydration. I was physically spent with still another hour to my destination. Pulling into Santa Rosalia, I sadly passed her mission for another time. I stopped just long enough to douse myself with water at the gas station, drink as much water as possible, and get back on the road.
Soon I was riding through the arches that welcome you to the proper start of the town of Mulege. My destination was Historico Las Casitas. After several attempts to find the hotel cursing my Google Maps, I finally arrived. I walked in, took off my riding gear, and as if they were waiting for me to arrive, a young man said not a single word; instead, he handed me a glass of lemonade, a drink from heaven made with fresh limes, lemon, and cane sugar. I emptied my glass in two long swings. Gratefully finding an ounce of composure, I asked about a room for the night. I soon settled into my volcano rock room with mosquito netting; it took me no time to pass out with cold air soothing my heat-exhausted body.
The Hotel Las Casitas courtyard.My room in the Las Casitas.
Waking in the late afternoon, I discovered the L-shaped courtyard covered in vines and trees, allowing for continual shade against the heat of the June sun. My bike was safely parked in the courtyard; I made my way to the bar to the young man who had saved me with his magical lemon concoction and ordered another (with tequila this time). Sufficiently recovered, I headed out to discover the town and look for another perfect taco. Mulege, another mission town founded in the early 1700s and known for the beauty of the river that runs her length ending at the Sea of Cortez, her proud mission sets up on a hill overlooking the palm trees and river. Sadly not open, I wandered around the grounds taking in the softness of the sunset overlooking the river. I headed back to the town square, and with a food stand next to the market, I had a satisfying plate of carne asada tacos with the best beans I’ve had in Baja. Heading back to the hotel, I found the courtyard packed with locals and visitors enjoying the evening coolness. I was lucky to be greeted by the owner, I learned more about the hotel’s history, and I met a friend of his who could take me horseback riding the following morning. With plans set for the next day I gratefully slipped between the crisp white sheets, pulled my mosquito netting around me, and drifted off to sleep dreaming of the adventures ahead.
I know many people on this page camp and ride, but some have yet to dive into mixing these two great passions. My objective in this article is to help you bridge riding and camping, alleviate any concerns on this topic, and build a foundation of knowledge for those new to motorcycle camping. In doing so you will discover a deeper level of motorcycling that many riders experience.
Help us bring more to you…please click on the popup ads!
Start with Less
With all the social media posts of riders from around the world sharing their epic adventures and providing reviews of the gear they use can cause anxiety. Intimidation from the expense and amount of equipment people use for moto camping can become overwhelming when starting this hobby. I’m not saying any of these riders are wrong in the gear (or the amount) they use, but my philosophy while motorcycle camping is less gear is much more efficient and cheaper. My first time moto camping I had nothing other than a one-person Kelty tent (which I still use), a sleeping bag, and a small personal hygiene kit. I planned to give moto camping a shot and figured I could survive one night out on Washington’s Olympic peninsula even if I was a bit uncomfortable.
I wasn’t uncomfortable at all. In fact, other than adding a 6-pack of beer and a crushed Subway sandwich my gear didn’t grow or change for the next 8 more years (even after “maturing” from a Ducati Monster M1100 to a BMW GS1200). Would I have been more comfortable with a sleeping pad, cooking set up, and maybe even a chair? Yes, but that came years later after learning from others (I am a bit set in my ways even if they force me to be uncomfortable). Starting from such a minimalist perspective and adding gear slowly allowed me to tailor my equipment perfectly. You will find everyone has a “better” way of doing things; you might want to learn what works best for you and expand slowly.
Start in a Familiar Location
Roaring through the dense rainforest of the Olympic Peninsula on my Ducati Monster I was excited to be camping with my motorcycle for the first time. In hindsight this choice was probably a further and more isolated location than I should have started with, but it worked for the most part. I had ridden the road several times, I was comfortable with the distance, and I was aware of the ever-changing weather conditions. Being new to this I didn’t pack rain gear and of course it rained heavily that night (I was forced into my tent by the weather by 7:00 p.m.). You must pack raingear if you want to ensure it never rains on your moto camping trip. But even with the weather not cooperating it was a fun first night and it was enough to get me hooked on the lifestyle.
Looking back, a more comfortable way to experience my first moto camping adventure would have been a more controlled environment. Even for those well-seasoned campers, testing new gear in your home or backyard to learn how to set up, adjust, and break down the equipment makes for a less stressful time in a real-world environment. Purchasing lots of expensive gear, not testing it, and going on a multi-state tour can be a painful way to learn the gear isn’t right for you or the climate. Another way to learn your equipment and build experience is at a state park close to your home or a KOA. Even if you have to retreat to the KOA store or end up back inside your house, don’t be discouraged. That’s what this step is for. Take notes on what worked and what didn’t, and build off that until you are comfortable with the next step, which can be dispersed camping or a longer distance ride. It is better to learn in this semi-controlled environment than to have a horrific night with improper gear in poor weather and become completely deterred from ever moto camping again.
Learn From Experience
Having completed a successful test runs with your gear it is now time to begin learning how to increase your confidence in harsher and more remote environments. This point in your experience level is also the perfect time to make gear adjustments based on your notes. With a few nights camping under your belt you can seek advice and learn from others, including their set up tricks and in what type of climate they moto camp. In doing so you will fine tune your camping outfit so that it is perfect for you, your motorcycle, and the climate.
During this phase it is important to remain open minded. Everyone has a method that works best for them. For some it is a half shelter at a roadside pullout, for others it can be as elaborate as a 6-man tent with copious gear that requires 2 hours to pack. Normally when I travel and moto camp it isn’t for just one night. I’m on the road for two to three months at a time with Airbnbs or hotels as resting points or for working. Even though I am comfortable with my moto camping equipment it’s always fun to chat up other motorcyclists. In most cases, even if their set up is completely different there is usually one or two takeaways I learn from conversing with them.
Conclusions
Moto camping is an easy and inexpensive way to escape the rat race with less effort than many would think. These experiences and the people I meet along the journey are some of the most best I have had. Being so removed from everything as you sit relaxing in the glow of a warm campfire reflecting off your moto is a fulfilling feeling that few venture to achieve.
Like that photo you see above? Yeah, me, too. I took it on the parade grounds at Fort Knox, Kentucky, a few years ago. I used to run the Composite Structures plant that made rotor blades for the Apache helicopter. It was one of the best jobs I ever had.
We recently reposted (under the Wayback Machine banner) our blog about the Gator mine system, and in it I promised to write about the Apache main rotor blade failures. This is another defense industry failure analysis war story that crosses company lines and supplier/customer boundaries, and I’m not entirely sure that there wasn’t some nefarious behavior going on at McDonnell Douglas. I’ll tell you what happened and you tell me.
The UH-1 Huey was a Vietnam War workhorse. It was extremely susceptible to small arms fire and you could hear it coming miles away.
During the Vietnam War, the Army (my alma mater) found that the Huey helicopter had a few shortcomings. I guess that’s to be expected; it was the first time the Army used helicopters in a major way in a real war. The Huey was susceptible to small arms fire (and big arms fire, too, for that matter) and it was noisy. On a clear night, you could hear a Huey coming in from a long way out with its characteristic “wop wop wop” signature as it beat the air into submission. That “wop wop wop” sound was actually the rotor tips breaking the sound barrier on the left side of the helicopter, so the Army knew it had to do something to get the blade tip speed below the speed 0f sound on its next-gen helicopter. Another big problem was small arms fire; a single .30-caliber AK-47 bullet through a Huey rotor blade would destroy the blade’s structural integrity (and there were a lot of AK-47 rounds in the air in those days). When that happened, the helicopter and its crew were lost. There could be no autorotation (you can’t autorotate without a blade) and you couldn’t bail out. The next-gen helicopter blades would have to be impervious to small arms fire.
Fixing the blade tip speed problem was simple. Instead of having two blades like the Huey, the Apache went to four blades. That cut the rotor speed and let the blade tips go subsonic. “Wop wop wop” no more. Easy peasy.
The structural integrity issue was the more significant challenge. The engineers at McDonnell Dougas (the Apache prime contractor) designed a blade that had four spars that ran longitudinally (with the length of the blade) contructed of AM455 stainless steel (a special blend used on the Apache and, at the time, nowhere else). The spars had overlapping epoxy-bonded joints that ran the length of the blade. The idea was that a hit anywhere on the blade (up to and including a 23mm high explosive Russian anti-aircraft round, roughly the explosive equivalent of a hand grenade) would damage that spar, but the remaining three spars would hold the blade together. It worked. An Apache blade actually took a blade hit from an Iraqi ZSU-23/4 and made it back to base.
A cross section of the McDonnell Douglas Apache blade showing the four spars.
So here’s the problem: The Army specified a blade life of 2200 hours (blades on a helicopter are like tires on a car…they wear out), but our blades were only lasting about 800 hours before the blades’ bondline epoxy joints holding the spars together starting unzipping. It wasn’t a catastrophic failure (the helicopter could still fly home), but the blades had to be repaired. The Army would send the blades back to McDonnell Douglas, and McDonnell Douglas sent them back to us at Composite Structures for refurbishment. If they couldn’t be repaired, we sold McDonnell Douglas a new blade (back in the 1990s, each blade cost just north of $53,000, and McDonnell Douglas put a hefty markup on that when they sold the blade to the Army). When they could be repaired, we still charged a hefty fee.
When I entered the picture as the plant manager, I learned that both Composite Structures (my company) and McDonnell Douglas (my customer) had made half-assed efforts to fix the blade problem, but neither company was financially motivated to eliminate it. We were making good money selling and repairing blades and so was McDonnell Douglas. The Army, however, was taking it in the shorts.
This was also a major problem for me as the manufacturing guy. I didn’t like having to make two blades to get one good one. We were rejecting one of every two blades we made for spar disbonds in the factory. You read that right: We had to make two blades to get one good one. Because of this, we were in a severe past due delivery condition, and my mission was to correct that situation. So we went to work on solving the problem. We found and fixed plenty of problems (blade cure profile issues, cleanroom assembly shortfalls, epoxy shelf life and pot life issues, nonconforming components issues, and contamination issues), but the blade disbonds continued. McDonnell Douglas continued to pound us for quality issues, all the while secretly smiling all the way to the bank as they continued to sell twice as many blades as they should have been selling.
We went through everything and finally concluded that there had to be a design issue with the blades; specifically, that the bondline width where the spars were glued together had too much variability. If that glue line was small enough, we reasoned, it wouldn’t hold up and the blade would disbond. We asked McDonnell Douglas about that (McDonnell Douglas was responsible for the design; we were building it to their engineering drawings), but they kept blowing us off. The bondline width wasn’t dimensioned on the McDonnell Dougas drawings. The other parts were, and McDonnell Douglas’ idea was that if the blade parts met their drawing requirements, the bondline width would be okay. That’s what they hoped for, anyway. But you know what they say about hope. You can poop in one hand and hope in the other, and see which one fills up first.
A macro shot of the bondline joint. The scribe lines (in the blue Dykem) show the bondline area.
I asked for a meeting with our company and McDonnell Douglas on the blade failures, and they wouldn’t meet with us. So I sent out another invitation, and this time I included the Army. McDonnell Douglas was livid when the Army quickly said yes; now, the McDonnell Douglas wizards had to meet with us on this issue. That meeting started about like I expected it to, with McDonnell Douglas tearing us a new one on the blade failures, telling us our quality was terrible, and basically letting me and the rest of the world know that, in their opinion, things had gone downhill since I had taken over as plant manager (no matter that this 50%-rejection-rate blade issue had existed for a dozen years prior to my arrival). I patiently explained the issues we had found and corrected, and then emphasized that the problem with blade separations had continued unabated. I then asked the McDonnell Douglas program manager about the bondline width and the fact that this apparently critical requirement was not on their engineering drawings. He denied it was the issue and went off about our poor quality again. When he ran out of steam, I asked the question about the bondline dimension yet again, and specifically, how narrow the bondline could be and still provide an adequate joint. There were more accusations about our lousy quality (the guy only knew one tune and he loved singing it), and I again waited for him to finish. When I asked the question a third time, before McDonnell Douglas lit up about our poor quality again the Army representative asked “yeah, how narrow does it have to be before the blade fails?”
The McDonnell Douglas guy stared at me like cobra looks at a mongoose (I’ve only seen this in YouTube videos, but I’m pretty sure the analogy is a good one). He sputtered and stammered and I think I saw a little spit fly from his mouth. “If you make it to the drawing it will be okay,” he said. I mean, under the circumstances it was the only thing he could say. I almost felt sorry for him, in the same way you feel sorry for a rat when a red-tailed hawk is swooping down with talons extended. You feel bad, but you look forward to seeing the hawk doing his thing.
The Army guy sensed this was something big. “How low?” he asked again. If there is such a thing as a perfect impersonation of a deer caught in the headlights, the McDonnell Douglas dude was nailing it. It was what we in the literary world call a pregnant pause, one of those “what did the President know, and when did he know it?” moments. As I type this, I can remember the scene like it happened 10 minutes ago, but it’s been close to 30 years.
“0.375 inches,” the McDonnell Douglas dude finally answered. He actually said the zero in a half-assed attempt to add engineering gravitas to his answer. “As long as they build it to the print, they’ll be okay,” he added, with a “so there” smirk. He was answering the Army man, but the smirk was all for me.
What the McDonnell Douglas guy didn’t know was that my guys could see the bondline width in an x-ray, and we x-rayed every blade returned for repair. And I guess he didn’t realize how easy it was to do a tolerance analysis to show what the drawings allowed the bondline width to be.
What happened next was one of those moments I’ll remember for the rest of my life. I looked my engineering guy and my QA guy. They knew what I wanted. They both left the room. Fifteen minutes later they were back. My engineering guy handed me the results of his tolerance analysis. The McDonnell Douglas engineering drawings tolerance stackups allowed the bondline width to go as low as 0.337 inch. The QA guy had even better information. All the blades that had been returned to us for spars unzipping (which was the only reason we ever saw a blade returned) had bondline widths less than 0.375 inches (McDonnell Douglas’ admission for the lower limit) but above .337 inches. In other words, our quality was fine. The failed blades met the McDonnell Douglas engineering drawings but were below the value I had finally prodded McDonnell Douglas into revealing.
I could have been more diplomatic, I guess, but that wasn’t me. I shared that information with the room. The Army rep smiled. “I think you guys might want to continue the meeting without me,” he said. And then he left.
The McDonnell Douglas guy exploded as soon as the door closed. He was apoplectic (I looked that word up; it means overcome with anger and extremely indignant, and that was him). McDonnell Douglas had been screwing the Army for years with a deficient design and now it was out in the open. They were potentially exposed to defective design claims from the Army (and from us) for hundreds of millions of dollars. Think about it: 12 years of Apache blade production, a 50% failure rate in production, a blade life of only 800 hours (against the Army’s spec requirement of 2200 hours), and the fact that we and McDonnell had factored all that waste into our pricing.
Fortunately for McDonnell Douglas, the Army wasn’t interested in suing them (all they wanted was good blades). My boss wasn’t interested in pursuing a claim against McDonnell Douglas, either, as they were our bread and butter and he wanted to keep the business. We fixed the problem by holding the blade components to tighter tolerances (tighter than McDonnell Douglas had on their drawings) so the bondline width would always be above the magical 0.375 inch, and we never had a blade unzip in production again. McDonnell Douglas did not correct their drawings, as it would have been an admission of guilt on their part that would absolutely guarantee a loss if the Army ever took them to court.
So there you have it: The Apache main rotor blade failures, all caused by sloppy engineering at McDonnell Douglas. It’s hard to believe that the blades had a 50% failure rate and didn’t meet the Army’s specified blade life for a dozen years before the problem was fixed, but that’s what happened. It’s also hard to believe that nobody at McDonnell Douglas went to jail for it.
Discovering motorcycles came late in life for me. My first ride was in 2014 on the back of a KTM. From the first ride I knew I was hooked, and I knew being on the back was not for me. By January 2015, I purchased my first bike, a 2006 Yamaha 225 XT. I drove from Sedona, AZ, to Denver, CO, to pick her up. On the drive home, I kept looking at her in my rearview mirror and dreaming of my future adventures. That is, once I learned to ride!
A day later I was on a quiet street teaching myself how to clutch and ride. The clutching came easy, and I had no fear as a newbie. Soon I was competent enough to go down the block, then to the store and friends’ houses, and soon off-road. Boy, I fell a lot at first, but I was surrounded by a group of guys who encouraged and taught me the basics. Many remain mentors to this day. I still have that little 225 XT and would never sell her or give her away. She will be with me till the end.
I soon added a Honda 750 Shadow to my new addiction and split my time between dirt and road adventures. It seemed a perfect balance as I gained more skills off-road with the 225 XT and could now venture further without trailering as I rode the Shadow. This led me to my third bike, new to the USA: A BMW 310 (a single cylinder in hot demand in Europe and Asia). She was a red bike far faster than my little goat, the Yamaha.
Broken Arrow Trail, Sedona, AZ.
With a bike that was great off-road while still able to handle the open roads, I set my sights on several bucket list trips, including the Pacific Coast Highway (Highway 1 up the California coast) and the Sierra Nevadas. These two trips in 2018 gave me the confidence to plan another solo ride. This time I would ride Baja, the peninsula in northwestern Mexico bounded to the north by the United States, to the east by the Sea of Cortez, and to the south and west by the Pacific Ocean. I set my plans for a Spring ride, but a trip to Hawaii and paddling the Colorado River got in the way in May, delaying my departure to June.
Want more stories? Help us bring them to you by clicking on the popup ads!
Adding a new 40-liter Wolfman tail bag, I departed Sedona, AZ, heading for a small town south of Tijuana, Alisito, known to the gringos as La Fonda. This was my first time crossing the US border on a bike, challenging my skills while negotiating what seemed like 100 lanes with traffic darting between the lanes. It was soon my turn to cross at San Ysidro south of San Diego. I had done this several times in a car, but what a whole new ball game on a bike!
Turning hard to the right, I made my way to Mexico Highway 1, following the Pacific coast out of Tijuana. The air was crisp even on a June morning as I pulled into the left lane to pass a line of trucks and a group of protesters, soon finding my groove, indulging in music through my helmet speaker and enjoying the sights along the way. An hour later, I pulled into the parking lot at Dmytri’s Restaurant, well-known by locals and visiting gringos alike. It was a time to meet friends and show off my new girl (BMW, to clarify!). The margaritas and conversations flowed as I assured all of my friends that I was utterly competent to ride Baja solo in the growing heat of June.
Bravada got me thru till the morning of my departure, then a massive wall of apprehension flooded me. WTH, I was not competent enough to take on this challenge solo in Mexico! A repeated flaw as I once again found myself vacillating between the urge to push myself and my endless fear of failure and the unknown. I did what I do best, shoved the fear down, and got on my bike heading south on Highway 1 while enjoying the ocean breeze and the endless views of the Pacific Ocean. All the while, I negotiated traffic and the epic potholes that ranged from minor to “might swallow my bike” in one epic plunge.
With the efficiency of the toll road, I was soon in the traffic and mayhem of Ensenada, a port city that is a frequent stop for cruise ships. The smell of exhaust and burning trash contrasted against the street stalls grilling fresh fish and carne asada. I could not resist and soon found a place to pull over for a cold Tecate and a plate full of tacos. The local girls working the roadside restaurant were enthralled with my bike, asking for photos on it it with the sultry hotness that only a Latina could pull off while wearing an apron. I accommodated their requests for pictures and answered a soon-to-be-frequent question of “Solo?” with “Si, Solo,” followed by “No, no, where is your man?” Ha, I didn’t even have a man at home, let alone on this trip, but I had someone I was thinking about a lot on this trip (a story I will tell in another post).
A Baja Campground.
With Ensenada’s noise and challenges behind me, I headed out of town to a campground with hot springs and soaking pools. The ride getting there was all dirt, rocky as hell, with several water crossings. These were my first water crossings on my own. I was both thrilled and nervous as I gave the throttle a firm twist and flew through creating a satisfying rooster tail. It was a short day full of first-time accomplishments that felt right and bolstered my confidence for the adventure ahead. I paid my entrance fee of 200 pesos, about $10, and proceeded to enjoy the hot tubs, complete with little cabanas and a hot shower.
Relaxing in the hot springs.
The next day I found myself back on the road. My destination would be the tiny town of Cataviña, a community of fewer than 200 residents. Cataviña is known for cave paintings, colossal rocks mixed with desert vegetation, and epic sunsets. This place could be on Mars with its endless boulders stacked at impossible angles and the stark beauty of the high desert plateau.
The day called for 380 kilometers, about a six-hour ride without stops. The morning started slow and easy as I retraced my ride back down the mountain and through the water crossings of the day before. After a quick stop at the OXXO convenience store for a burrito and coffee, I was on the road heading down Highway 1. The road went into the interior, passing through several tiny dusty towns and a few newfound favorites, including San Vicente and San Quintin. One of my favorite finds is Don Eddie’s Landing Hotel and Restaurant, an oasis with comfortable rooms, sports fishing, and even a few camping spots. I settled in at their patio, enjoying the views of the Pacific and Eddie’s legendary hospitality. This place is an ideal rest spot for enjoying a perfect plate of shrimp ceviche with just the right intensity of lime and chilis, complete with Don Eddie’s legendary hand-crafted margaritas, the likes of which I’ve never found in the USA.
A Don Eddie’s Margarita.
Reluctantly leaving Eddie’s, I continued south on Highway 1, turning inland at El Rosario de Arriba, climbing up from sea level to 1841 feet. The elevation change did little to abate the day’s growing heat. I arrived intending to camp, but the reality of a 98-degree afternoon soon had me sapped. I pulled into the only commercial enterprise besides a little store across the street and a few tiny restaurants.
The Hotel Misíon Santa María – Cataviña looked like she was built in the colonial era; in reality, I learned she was built by the Mexican government as part of their tourism outreach. With a courtyard full of flowers and mature trees, I found a haven and counted my good fortunes to stay in such opulent digs (opulent compared to my humble tent). After securing my room for the night, I quickly dumped my gear, splashed some cold water on my face, and confirmed that I looked like I had ridden in the heat all day. I landed outside in the shade near the little bar enjoying my margarita. The bartender generously gave me endless glasses of water while we chatted about the heat, my bike, and his childhood in Arizona. Soon it was time to head to bed. I reached down to grab my bag and Delorme. A momentary shock as my Delorme was nowhere to be found. The little safety device would allow me to signal for help if needed and text my friends and family when off the beaten path and far out of cell coverage. The bartender and manager helped me search the grounds to no avail. I gave up and went to bed, cursing myself for my carelessness.
Catavina Sunset.
The following day bright and early I rode across the street to purchase the only available gas in this remote region from locals selling gas in plastic drums and liter-size soda bottles. Saying a prayer for the safety of my engine, I had them fill up my tank and MSR fuel bottle I always carry for the just-in-case moments.
Soon I was on the road headed to Guerrero Negro. The wind brushed over me gently with no hint of the high wind advisory posted for later that day. I left the unpleasantness of my Delorme loss behind and leaned into the joy of the ride. As it was a Sunday, I had the road to myself, with the added blessing of many commercial vehicles being home for the day. This was precisely what I had been dreaming of. As the starkness of the desert unfolded in front of my bike, I knew how lucky I was to be on this adventure! I was once again reminded to grab my dreams, ignore the naysayers, and embrace the adventure ahead.
Never miss an ExNotes blog:
Venturing into Baja? Insure with the best: BajaBound. It’s what we use.
The Ruger Model 77 rifle goes back to 1968. It gave Ruger a place in the centerfire hunting rifle class, and like the Remington Model 700 and Winchester Model 70 it would compete against, it outdid both by using the lucky number 7 twice in its name. The Model 77 is a good-looking bolt action rifle based on the Mauser design, with a classic walnut stock designed by famed custom rifle builder Lenard Brownell. I’ve owned several Model 77 Rugers, including this new-in-the-box .30 06 Liberty gun. I’d like to be able to tell you how accurate it is, but I can’t. I’ve never fired it. Nor has anyone else, other than the person who test fired it before it left the factory.
Every firearm Ruger manufactured in 1976 carried this inscription.There’s no lawyer’s warning on the barrel about reading the instructions. We call these “pre-warning” guns. They were made in a time when people had more common sense.
The Liberty designation mentioned above refers to the “Made in the 200th Year of American Liberty” roll marking on the barrel, which was a feature Ruger had on all its guns made in 1976. I bought the rifle in El Paso that year (I was in the Army stationed at Fort Bliss). This one has every thing that came with the rifle (the original serial numbered box, the scope rings and their blue cloth bag, the instructions, and the warranty card). It’s a brand new, unfired, almost-50-year-old rifle.
The tang safety Model 77 is considered more desireable.The original box. The cardboard held up surprisingly well. This gun is new in the box (NIB) and this is the original box.Original documents!The box is serialized to the rifle. I obliterated the last number, which almost makes it look like the serial number matches the chambering.
You know, Rugers (and most guns, for that matter) were different 50 years ago. The bluing was deeper, the checkering was hand cut (and way better than the laser cut fuzzball checkering you see today), and the guns just felt better. This Ruger is like that. It’s immaculate, and there’s only safe ding on the stock. Other than than, there’s not a mark, dent, ding, gouge, scratch, or (Heaven forbid) spot of rust anywhere on the rifle. Even the anodized aluminum floorplate is pristine.
The Ruger Model 77 MSRP was $169.50 in 1976 and I believe I paid something like $139 for this one. I probably have the original receipt for it somewhere. A new Ruger Hawkeye in .30 06 (the rifle the Model 77 evolved into) lists for $1399 (yep, ten times what I paid in 1976), but a new one is not as cool as the one you see here.
Plain walnut, but elegant in its own way.The unmarred anodized aluminum floorplate.Early Ruger Model 77s wore this grip cap.Check out this gorgeous hand cut checkering. You don’t see that too much today!The rifle’s sole safe ding, done by yours truly. Nobody’s perfect. It will steam out. I’m leaving it like this.God’s cartridge. The .30 06 is one of the all time greats.
This rifle may be going on the block soon. It’s time to start downsizing the armory and it’s time for someone else to enjoy owning it. You’re probably wondering how much I’m going to ask for it. So am I. As I look at this magnificent example of 1970s firearm manufacturing and post these photos, I’m having second thoughts. It is a .30 06, and that’s God’s cartridge. Maybe it needs to send a few rounds downrange, and maybe I’m the guy to do it. We’ll see.
