I had trouble selecting a title for this blog. The other contender was 50 Shades of Gray to go with the big photo you see above. I wish I could say I took that photo, but the credit goes to good buddy and master gunsmith TJ. TJ is the best pistolsmith there is, and one of the things that makes working with him so enjoyable is his photography. When TJ works a custom gun project, he photodocuments it to keep you appraised of what’s going on, and a couple of the photos you see here are the ones he sent to me on my Model 60 project. But I’m getting ahead of myself. Let me back up a bit.
If you follow the blog (and you all do, right?), you’ve been watching the Star reloader resurrection project I’m working. That’s coming along nicely, and I’m already making .38 Special ammo on my resurrected reloader. This story started with my noticing an ad in my gun club newsletter for a Model 60 at a killer price. I’m normally not a snubnose kind of guy, but hey, a deal’s a deal and I like the idea of a snubnose .38. Maybe I watched too many cop shows in the ’50s and ’60s. You know. Cannon, Kojak, Hawaii 5-0, 77 Sunset Strip, Dragnet…you get the idea. All those guys carried snubbies.
Anyway, the Model 60 was a good deal, but swinging the cylinder out to the side was a bit dicey…sometimes it wanted to stick. The seller told me about that but I didn’t see it as a problem. I saw it as an opportunity to do another project with good buddy TJ, and that’s what I’m doing. TJ is doing his Level 1 action job for me (polishing all the internals and lightening both the double and single action trigger pulls), and I’m having him also put a mirror finish on the cylinder, the ejector rod, the cylinder release, the trigger, and the hammer. It will make for a nice, subtle contrast with the brushed stainless finish on the rest of the gun. That leaves only the grips, and I’m doing something about those, too. TJ put into words what I was thinking, and that was that the stock grips (the ones you see above) are butt ugly (pardon the gun pun).
Back in the day Smith used to offer uncheckered rosewood grips, and that’s what I really wanted. They don’t sell those any more, though, and I mentioned to TJ that I should have bought a set back in the ’70s. You know, just in case. “Try E-Bay,” TJ said, and I did. I hit paydirt almost immediately, and the grips you see below are on their way to me now. Rosewood. Smooth. Just what I wanted.
The finish on my inbound grips may be a little funky, but that’s another opportunity, too. It’s TruOil
The Star reloader is operational now (I’ll show you more on the Star resurrection in upcoming blogs, and I’ll include a video that shows it making finished ammo). I’ll have the Model 60 back in a few days, so I went ahead and loaded a box of ammo with the outstandingly accurate 158-grain cast bullets I get from my good buddy Roy. It took only a few minutes on the Star (it would take closer to an hour on a single-stage press). For a machine that’s probably older than I am, the Star sure does a good job.
When I take my custom snubbie .38 to the range, I’ll grab a few photos and share a range report with you here on the ExNotes blog. Stay tuned, my friends, and keep your powder dry.
More Tales of the Gun!
Enter your email address for a free subscription to ExNotes!