This popped up on my YouTube feed this morning. It’s a series of videos from a guy named Spencer Conway. I never heard of Conway before this morning, but his videos are impressive. It’s a series of videos about Conway’s circumnavigation of South America. I don’t think this is the entire series, or maybe he hasn’t finished the entire series yet, but I found these five and I thought I would post them here for you. Grab a cup of coffee, sit back, and enjoy!
Don’t forget to consider adding your email address to our list so that you can get automatic updates when we post a new blog. You’ll be automatically entered in our free giveaway of one of our moto adventure books, and we’ll never share your email with anyone else!
I’ve been a huge fan of the .30-30 since the mid-1970s, which is when I first owned a Marlin 336. I think I paid something like $50 for it, and it was an incredible rifle. We hunted jackrabbits in west Texas in those days and that rifle seemed to be laser guided. I just couldn’t miss, even when Bugs Bunny was on the run. The old Marlin had a front sight shroud, and it served as a good aiming device when Mr. Bunny was vigorously hopping down the bunny trail. I just held on the rabbit between the front sight post and the inner edge of that shroud, and whump! Yep, I did my duty as a soldier in the Great Bunny Trail Traffic Reduction Wars of the mid-1970s. As I recall, one of my friends offered me $70 for that first Marlin back in those days, and that ended my .30-30 career for the next several years. But I remembered the .30-30’s light recoil (it’s only about half that of a .30 06), its tremendous accuracy, and the off-the-charts fun factor.
Fast forward to about 10 years ago when I told the above story about that old Marlin to my good buddy Chris. I mentioned to Chris that I would like to own a .30-30 Marlin again. A week later, Chris emailed a link to a California sporting goods store’s online used gun listing, and there was a Marlin 336 for sale. The store was in Redondo Beach (about 60 miles away). I called and asked them to hold the rifle for me, but they wouldn’t do it. “You need to get in here if you want it,” the kid on the phone said.
Which I did. I told my boss I wasn’t feeling well, and his response was “Another gun?” Yep, you got it, Boss, and it was Subie WRX wheels-in-the-wells time. I was Redondo-Beach-bound.
I arrived at the store and explained to the kid the behind the counter that I was there for the Marlin. The gun department manager overheard me and told the sales kid, “Good! Take that damned thing off the Internet. The phone’s been ringing off the hook.”
I didn’t know it at the time (even though I considered myself to be a knowledgeable gun guy) but this particular Marlin was highly collectible. It wasn’t just a Marlin 336. It was a 336 Octagon. The story goes something like this: In 1970, Marlin produced a run of commemorative 336 rifles with fancy walnut, real cut engraving (not the rolled-in cheapo engraving you see on most commemorative guns), and octagonal barrels. The commemorative rifles were offered to celebrate Marlin’s 100th year in business. The Marlin wizards in North Haven had purchased a run of octagonal barrel blanks and after producing the commemorative rifles, they had a few octagonal blanks left over. The Marlin guys decided to use up the extra octagonal blanks, which they did with an uncatalogued run of standard Model 336 rifles. And that’s what this rifle was…one of the overrun 336 Octagon models that never made it into any Marlin sales literature. They’re scarce. The sporting goods store guys, not being experts (it was a chain store) didn’t understand what they had. Nor did I, at the time. I paid what they were asking for the rifle (which was $300, a fair price for a used Marlin .30-30). Then I found out what I had. Wowee! I’ve since turned down offers of $1000 for this rifle. My 336 Octagon was a real score, not that I’d ever be interested in selling it.
Yep. There are only about 300 of these in the world, all made in 1970. The Marlin 336 Octagon was a real score for me. Nope, it’s not for sale. Never will be.The 336’s standard post front sight. The 336 I owned in the mid-1970s had a front-sight shroud. A shroud would look out of place on an octagonal barrel.Caliber .30-30 Winchester. In the 1890s, Marlin didn’t use the Winchester designation for the chambering; Winchester and Marlin were competitors.I added a Williams receiver aperture rear sight with oversized eyepiece, undersized aperture, and click adjustments. Even though it’s 50 years old, this is a very accurate rifle.
The .30-30 is as cartridge with a history. It was introduced in the mid-1890s as the .30 Winchester Smokeless for the Model 1894 Winchester. I’ve played with the 1894 Winchester and I don’t much care for it. The Winchester is a lever gun (like the Marlin), but it’s not as accurate (in my opinion) and it is a much more difficult gun to disassemble for cleaning and reassemble after cleaning (in everybody’s opinion). Nope, I’m a Marlin guy when it comes to lever action rifles. It’s a Ford versus Chevy, Republican versus Democrat kind of thing. I like Marlin.
My reloaded .30-30 ammo. This particular load used 22 grains of IMR 4198 powder and a 150 grain Speer flat point bullet. I have other reduced loads using Trail Boss and Unique powder with Extreme plated bullets. This is one of those rifles that seems to shoot everything well.
You might wonder about the .30-30 cartridge designation. It goes like this: The first .30 refers to the bullet diameter (it’s 0.308 inches in diameter), and the second 30 refers to the grains of smokeless propellant behind the bullet in the original factory loading. That’s another thing…this was the first cartridge to use smokeless powder (instead of the smoke-belching, corrosive black powder in use up to that point). It has a muzzle velocity of about 2400 feet per second. The experts say it is a good for deer up to 200 yards. I would pass on a shot at that range. I can tell you that in the 50-to-100 yard range, the .30-30 is awesome. I once shot a 5-shot, 1.25-inch group at 100 yards with this rifle (using open sights). I only did that once, but I’ve been bragging about it ever since.
In its day, the .30-30 was a real breakthrough cartridge, and even today, it is wildly popular as a deer cartridge (it’s estimated that more deer have been taken with the .30-30 than all other cartridges combined). It’s a hoot to shoot (especially in a rifle as classy as the one you see here), and it’s one of my favorites.
Keep us afloat…please click on those popup ads!
Want to see our other Tales of the Gun stories? Just click here!
How does this old Marlin compare to a modern one? Hey, check out this Marlin Texan!
Hey, maybe you noticed, maybe you didn’t…but we’ve added a few new header images at the top of our blog. Gresh suggested we needed more motorcycle oriented pictures, and I agree with him. Gresh is smart that way. I never claimed to be the brains in this outfit; I’m just the good looks.
I’ll be adding more header images in the coming weeks, too. We’ve got tons of photos from our travels, and yeah, I like to show them off. The photos have to be ones that will crop to a 1200×280 pixel format, which eliminates most almost immediately. But I have a few that will work.
The way this header thing works is every time you visit the blog, one of six images randomly pops up. I could have set the header up so the images would scroll, but I did that when I wrote the CSC blog and I found it distracting (while you’re reading the blog, the header image keeps changing, drawing your attention away from the blog du jour). And I didn’t want to put a description directly on the image because I didn’t want it to take away from the photo, so I thought I would add a description here.
So, to get to the point, these are smaller versions of the header images, along with a brief explanation of each.
This is the original ExNotes blog header image, which will still pop up from time to time. I love this photo. I took it on the ride through Colombia in Mompox, a mystical town tucked away in a magic land. I’d like to invite you to read the blog I wrote on Mompox a few months ago. If you look real close, you’ll see my good buddy Juan, who I rode with in Colombia and on the CSC Western American Adventure Ride.Ah, the whales Scammon’s Lagoon, Guerrero Negro, Baja California Sur. Gresh and I are going to ride there in March. It’s one of life’s real treats. We’ll be blogging the entire trip, and we’ll be insured with BajaBound Insurance (the best there is).Wow, another Guerrero Negro photo, this time after the bikes had been put away for the evening at the Don Gus Hotel. I love the hotel and the restaurant (and the bar, too!) at the Don Gus Hotel. This was on one of the CSC Motorcycles Baja adventure rides.One of the best parts of any Baja adventure ride is the cuisine. These are tacos we enjoyed on the recent ride with Janus Motorcycles. The food down there is fantastic!Janus Motorcycles parked along the Malecon in San Felipe. This was a great Baja ride, and the Janus machines performed perfectly. It was a grand adventure. Hell, they all are!A photo of Jordan Swartzendruber (on the left, hugging the center line) and Devin Biek (on the right), both on Janus Motorcycles. We did about a thousand miles in 4 days on these 250cc motorcycles. It was one of the coldest rides I’ve ever done, but we had a grand time!
And there you have it. Like I said, we’ll be adding more header photos in the future, and we’ll tell you about each one as we do so. I shot all of these photos with my Nikon D3300 digital single lens reflex camera and its 18-55 lens, which is a very reasonably priced, entry-level DSLR outfit. I find the photos refresh my memory of the great times I’ve had on each of these rides. In fact, those pictures above are making me feel like getting out on an adventure ride again. Soon, folks, soon…
I’m not superstitious but the 13th installment of Zed’s Not Dead ran into a few problems. I’ve been having good luck misting a light coat of Krylon black spray paint onto bare metal sections of Zed. It really freshened the frame without looking like the frame had been completely repainted.
Until I misted the swing arm, for some reason the transition zone between bare metal and original paint bubbled up making a mess out of the thing. I don’t know what the difference was but after trying to remedy the situation four times I gave up, sanded the swing arm and shot it with primer. The black paint laid down nicely after that but so much for keeping it original-ish.
I started on the front brake system and noticed this cool little eccentric bolt that adjusts the free play on the master cylinder. There are so many nice touches like this on the Z1. Kawasaki tried to build the best motorcycle they could. The master cylinder was in good shape. These things are a bear to reassemble but after five tries I managed to get the plunger in the bore along with the c-shaped travel stopper and the snap ring. The only complaint I have against the Z1 Enterprises master cylinder kit is that it didn’t come with the rubber bellows (the part that keeps brake fluid from sloshing in the reservoir) so I’ll have to order that bit.
The metal brake line to the caliper was stuck mightily. I tried heat and penetrating oil and even bought a set of metric line wrenches but in the end it took a vise and brute force to remove the line. It’s not destroyed but I’ll be buying a new metal line along with both flexible hoses and the little bracket that holds the line away from the front fender.
Once apart, the caliper was in excellent condition. I sanded the bore to remove corrosion and the Z1 Enterprises rebuild kit had everything I needed to reassemble what I hope is a good slave cylinder.
The previous owner had the rear axle assembled wrong and my book was illustrated with the spacers reversed so a quick message to Skip Duke and I had the spacer order correct.
The sprocket side gets only the seal spacer while the drum brake side gets the long, necked-down spacer. The thick washer-spacer (that was jammed into the drum brake side) is actually a washer. It spaces the castle nut the correct distance for the cotter pin or hitch pin hole.
The stock swing arm grease nipple would not accept my grease gun fitting resulting in grease all over the place. In this photo you can see the differences. Rather than get the correct tool I tapped the fitting for a standard nipple and screwed the mess together.
I’m not happy with the grease nipple set up although it did allow me to grease the swing arm. I’m going to remove the fitting and have another go at making it look better.
Zed’s rear end is coming along nicely. I think the 4.10X18 tire looks a little puny on the bike so you may get a Smokey burn out video after all. Next tire I get will be a 4.50X18.
I’m making a list for my next Z1 Enterprises order and this list should cover most everything I need to get the bike rideable. Those new bodywork sets they sell sure look nice and only $1300 for a tank, tail and side covers, all beautifully painted in stock striping. You can’t get your original stuff painted for $1300!
Want to see the rest of the Z1 resurrection? Just click here!
The YJ, built from 1987 until a somewhat vague date in either 1994 or 1995, came with leaf springs. Next to no suspension at all, leaf springs are the simplest way to attach four wheels to a frame. The addition of a hydraulically dampened shock absorber is the only thing separating the Jeep YJ from a Conestoga wagon.
In 1987 Tort Lawyers at American Motors Corporation wrested control of Jeep’s design offices from the guys that actually knew what they were doing. In an attempt to cut back the number of Jeeps rolling over on America’s roadways, the Sons, Sons and Sons-a-Bitches law firm decided that restricting the Jeep’s already stiff wheel travel to no travel was the answer.
AMC-Law’s track bars and sway bars were configured in such a way that the various components were in constant mechanical opposition to each other, eliminating wheel movement. Naturally this bind produced extreme loads on the hot attachment points causing the rod and linkage connections built into the Jeep YJ’s frame to self-destruct. Oddly, the more things broke on the frame, the better the YJ rode. How many cars can you say improve dramatically by removing 50% of the suspension parts?
Reason 2: Square Headlights
If ever a vehicle cries out for square headlights it’s the Jeep. The whole car is a box with a slightly smaller box set on top of the first box. With square fenders, square gauges and square tail lights it’s only fitting that square owners dig the headlights. Less hard-core Jeepers (anyone who dislikes square headlights, really) complain about the YJ’s face but never bother to spend the extra effort on their own face. A little concealer, maybe a dash of rouge and a finely cut-in set of lips would go a long way towards making themselves more presentable down at the Mall. And they’re always at the Mall.
Reason 3: We Still Wave
Jeep YJ owners are the last generation of Jeep drivers to wave at each other. There has been a long-standing tradition of Jeep people waving which indicates to other Jeeps passing in the opposite direction that they have bits of their bodywork falling off. Or that the Jeep is on fire. Newer Jeep owners, coddled in their climate-controlled interiors and bedazzled by multi-color dashboard displays going haywire have lost the ability to see other Jeeps. With automatic transmissions and soft, coil-sprung axles their bodies and especially their arms have atrophied from disuse. And the newer the model, the worse the prognosis: buyers of Jeep’s latest model, the JL, are kept alive in a nutrient-rich petri dish until a help-mate smears their gelatinous bodies onto the JL’s driver seat. They aren’t even sentient; how could they wave?
Reason 4: The 2.5-Liter 4-Cylinder
Many YJ’s came with a 6-cylinder engine and that’s fine if you like that sort of stuff. YJ connoisseurs know that the 2.5-liter, 4-cylinder is AMC’s gift to off-roading. Weighing 100 pounds less than the 6 it produces 25% of the power while consuming the same amount of fuel. The extra power of the 6 is futile because with its boxy shape top speed on a Jeep is limited by wind resistance. Under ideal conditions, dropping a YJ out of a cargo plane will see the thing reach 80 miles per hour as long as it doesn’t start to flutter or break up.
Reason 5: The AX5 Transmission
This transmission gets a bad rap from Jeep haters because it disintegrates from time to time. What they are too dense to grasp is that Jeep engineers planned the AX5 to act as a fuse between the 35-horse 2.5 engine and the Dana 35 rear axle. The combination of a weak engine, weak transmission and a weak rear axle, like the trinity, is an economical mixture that transcends the sum of the components. The Internet is full of stories about YJ’s that have gone off-road and survived. I’ve only broken my transmission once and the rear axle once. It’s that good.
The Jeep YJ is the last of the real Jeeps, the hard-core Jeeps that keep you awake at night wondering what that sound was. YJ’s can draw a direct line to Jeep’s military past and have a sort of Stolen Valor way of conking out when least expected. That’s all part of the fun. Sure, modern jeeps may be smoother off road but if smoothness is what you are looking for, stay on the pavement. And get some exercise because you really should start waving.
I’m back after a 4-day, thousand-mile ride through Baja on a Janus Gryffin. I’m well-rested, I’m warm, and I had a great time. It was a ride I’ll remember.
Brrrrr. That’s Devin Biek on the left, one of the two Janus founders (Richard Worsham is the other one). The guy on the right is Jordan Swartzendruber, the Janus video and photo guy.
On our first day we rode up to Idyllwild on icy roads, on to Julian, and then to the border near Tecate. Wow, was it ever cold! On every motorcycle trip, there are those “Why I am doing this?” moments, and I had more than a few of those on that first day. We stayed in Pine Valley on the US side that first night, a wide spot in the road with one restaurant open that evening, the appropriately-named Frosty Burger with outdoor seating only. Nope, too cold for that. It was to be a general store with sandwiches and pizza that night, which we ate standing in the store (the place had no seating). We joked with the two ladies behind the counter. “I’m married, ladies,” I told them, “but my friends Jordan and Devin want to know if you’re single.” It was that kind of an evening. We were out in the world on a motorcycle ride, headed for Mexico.
We crossed the border the next morning and the Mexican immigration officer successfully pitched his homemade salsa to us. It was funny. I tried to imagine a US Customs officer examining my passport in LAX and asking “hey, have you ever considered becoming an Amway rep?”
The bikes drew a crowd of Mexicans at the immigration control point, and that occurred every place we went. Even folks with no motorcycle knowledge knew they were looking at something special. Those who knew bikes understood these machines even better. A Mexican gentleman about my age examined the leading link front suspension and said “Ah, like Montesa.” His knowledge of vintage Spanish motorcycles surprised me and I immediately thought of Joe Gresh (it’s a private joke, folks).
Devin’s Halcyon model on the Rumarosa Grade. Note the Montesa-like leading link front suspension. I rode the Gryffin model, which I liked a lot. Richard Worsham rode this bike across the United States.
That day we stopped for photos as we rode through the Rumarosa Grade, and then it was on to the Mexicali bypass. We picked up Highway 5 south, and it was on that stretch that I really bonded with the Gryffin. I can only do that on a motorcycle with a soul. Some motorcycles have no soul and no character. But the Janus did. My good buddy Marty once bought a new Honda CBR1100XX, a bike with incredible performance stats. But he sold it after only a few months, and when I asked why, Marty told me it had no character and no soul. I realized as I rolled through Mexico at a steady 50 mph that the Gryffin was something special. It spoke to me. The burble of its CG engine had a good sound. The cold air felt less cold, and the bike just felt right. It’s not something that’s easy to explain. Some of you will know what I’m talking about.
I knew a taco stand I wanted to visit for lunch, but we were already out in the desert coastal plains north of the Sea of Cortez and I had not seen it. Maybe it closed since I was here last, I thought, or maybe I just missed it. That would be disappointing. Then, nope, there it was. It was to be our first meal in Mexico. I was hoping Devin and Jordan would like it. Some folks get Baja, and others don’t. I would soon know if these guys would understand Baja’s magic.
The boys, about to savor their first Baja cuisine. It was grand. One bite and these fellows totally understood Baja.
Jordan ordered tacos. I ordered a quesadilla, and Devin did, too. We sat at one of the tables in front of the counter, all outdoors, and I looked at Jordan. He was chomping down on a taco bathed in guacamole sauce. He nodded approvingly, savoring the best of Baja. My quesadilla was delicious. Devin took a bite of his and smiled. At that instant, I knew this was a great trip, one for the ages. These guys get it, I realized. Devin, who had said something about being a vegan at the start of our trip, abandoned all thoughts of vegan purity. Hey, it’s the 500-mile rule. We were outside the perimeter of all mortal regulatory constraints and anything went. Devin wondered aloud if he had time to order a second quesadilla. He looked at me. You bet, I said. Go for it. More Mexicans stopped to admire and ask us about the motorcycles parked at the edge of our table. It was fun.
We burbled further south on Highway 5. The bikes purred. There’s just something about a single that says all is well with the world. And all was that fine day.
Dinner in along the Malecon in San Felipe that evening was fun. It had grown cold again, but it was not the bitter cold of Pine Valley. We looked out into the dark over the Sea of Cortez, knowing we had been carried to this spot by our Janus motorcycles. We had Tecate cerveza, con sal, with a wedge of lime. Devin ordered a bowl of guacamole. Chips and salsa were before us. They say you truly know the limits of your self-control when the chips and salsa are in front of you. I had none (self-control, that is). It was a wonderful dinner.
“So how does it feel,” I asked Devin, “knowing that you’re riding a motorcycle you designed and built, being in a place like this?”
Devin smiled. “It feels good,” he answered. He ordered another Tecate, one of the life’s grand treats, bottled in a city we had ridden through just that morning.
Burbling along on Highway 3, headed to Ensenada along a road few ride. We owned the road that fine morning.
We were up early the next day, and we were on our way diagonally across Baja to Ensenada. We owned the road; there were almost no other vehicles on Highway 3 that morning. The photo ops were great. The scenery was impressive. We stopped for fuel at a Pemex in Valle Trinidad. It was grand, as riding a motorcycle in Baja always is. We rolled on for 70 miles and entered Ensenada from the southeast. It was a heavily-littered area and the traffic soon grew heavy. We caught glimpses of the Pacific Ocean. We passed an intersecting road that entered Highway 3 at an angle at least 45 degrees steep. I wondered how any vehicle could make it up such a grade, stop, and then enter our roadway. Ah, Mexico. I love it.
We rolled into Tecate late that third night. The Janus motorcycle’s headlight is impressive; it did a much better job than I expected. The El Dorado hotel had no vacancies, so it was on to the Hacienda (a mile further up Benito Juarez Boulevard), and we were in luck. Dinner that night was Chinese food. Yep, Chinese food in Mexico. Chinese restaurants abound in Mexico, and they are excellent.
We were concerned about the next day, as the forecast was for rain. Up early again, we turned in our tourist visas at the Mexican immigration office (no pitches for salsa this time), and we cut through the K-barriers to jump the line to the US border crossing. That little trick took at least an hour off our trip, and nobody tear-gassed us for rushing the border. The US border control officer was intrigued by my motorcycle. I told him about Janus and mentioned that the founder was on the next bike. I think he found that even more intriguing.
Our ride home yesterday began with the mountains and twisties of southern San Diego County, and then we entered San Diego’s morning rush-hour traffic. It was the 94 to the 805 to the 15, and then a 120-mile drone north. Rain hit us just south of Temecula. We rode through 30 miles of it, we stopped to top off the bikes in Elsinore (yep, a Honda was named for the very same city), and a few miles further down the road the rain stopped.
That was our ride. Like I said above, I loved it. Even the cold parts and the rain. Those are the parts of any motorcycle trip I always remember. Time washes away the fleeting discomfort and it all blends together as part of the adventure.
So, on to the Janus motorcycles themselves. What are they like?
In a word, they are unique. They are vintage, but new. They target a special kind of rider. They are not for everybody and not everybody will understand what they are. But those who do….well, read on, my friends.
I’ve read comments about Janus on the forums saying they’re too expensive, they’re Chinese, Janus won’t last, you won’t be able to get parts, they’re overpriced, and on and it goes. There’s a behavioral science term for this kind of Internet forum negativity and nastiness: Online disinhibition. It means that folks say stupid stuff on the Internet they would never say in person. Couple that with the fact that a motorcycle is an emotional purchase, and you see some really wild stuff out there. Anyone with a keyboard and a connection thinks they are an expert on motorcycle design, manufacturing, procurement, service, and of course, marketing. My take on all of this? If ignorance truly is bliss, there are lots of really happy people out there.
As I said above, somewhere on the road to San Felipe I bonded with the Gryffin. It just felt right to me. The motorcycle had a gem-like quality, with the precise and exquisite feel of a Rolex wristwatch. The fuel tank is a work of art. The leading link front suspension has a hint of R69S to it; the bike doesn’t dive on braking (a benefit of this kind of suspension). The colors just flat work and they are elegant. The seat looks right (Devin apologized about the comfort level and he told me they have a new seat coming, but it felt okay to me as is). The frame is a deep gloss black. The rear rack works and it looks good. The switchgear was slightly different than what I am used to, but I became comfortable with the Janus layout quickly. The fit and finish are superior.
I know the CG engine well, having ridden many long-distance trips on CG-engined CSC motorcycles. It’s no secret that I’m a big fan of the CG engine, and the Janus bikes showcase the engine well. I know where the engine is made (China) and I know where the design originated (Brazil and Japan), but this vertical single has a distinctly British look. In fact, even though the Janus and nearly all of its parts are fabricated and assembled in Goshen, Indiana, the bike looks British to me. Not British as in Triumph’s Kawi-inspired multis or today’s Thai-built Bonnevilles, but British of the Cotton 650 single, the BSA M20, or Brough Superior days (and I realize as I type this that the naysaying keyboard commandos will have no idea what I am talking about). I like that early British look, and I think the Janus guys nailed it. Maybe that’s why I bonded with the bike. Cue in the theme music from any James Bond movie, with Sean Connery’s voiceover: Bond. Janus Bond.
I like that you can see the motor. It’s a motorcycle, see? You’re supposed to be able to see the motor on a motorcycle. You can see the engine on this bike. It’s the way God intended a motorcycle to be. Body work? Fairings? We don’t need no stinking fairings!
Here’s something else I like: The Janus folks don’t like chrome. That doesn’t mean the bikes have no shiny components (they have many), but when you see something on a Janus that’s shiny, it’s not chrome. In nearly all instances, it’s polished stainless steel. Made in Goshen, Indiana. That’s right here in the US, you know. Tell me again why you think $7000 is too much for this hand-built motorcycle?
About 25% of our trip involved riding in the mountains and that meant tons of twisties. The bike handles well, even with the weight I had strapped on the rear rack. Devin told me that I went through a corner with the motorcycle leaned over way more than he had ever seen. I told him I wanted to assess how the bike took a corner hard; I didn’t tell him I hadn’t been paying attention and I entered that corner way too hot. Trust me on this: The bike handles.
The Janus motorcycles excel in drawing a crowd, far more so than any other motorcycle I’ve ever ridden. The things are magnets. People know they are seeing something special, and once they get close enough, the Janus attention to fit and finish makes the motorcycles even more visually appealing. The closest thing I’ve ever seen to a bike attracting this kind of attention were the CSC Mustangs, and the Janus was even more of a magnet. Many folks thought the Janus motorcycles were restored vintage machines. We experienced this kind of attention at virtually every stop.
Look, I know you can buy a used (fill in the blanks here, keyboard commandos) for less than the cost of a new Janus. That’s missing the point entirely. I’m fairly confident that no one ever considered a used Sportster as an alternative to a Janus. Nope, this bike is for someone who wants something special, something different, something that is not made to appeal to the broadest possible market. I asked Devin if he and Richard Worsham (Janus’ other founding partner) did a market study before they introduced the bike. You can guess the answer. “No,” Devin answered. “We built the bike we wanted to build.” So, if you’re a person who follows the crowd, this is not your motorcycle. If you’re a person who makes your own decisions, though, then you’re in the zone here, folks.
About that $7K price: The keyboard commandos have said that’s too much for a 250. I don’t think so. Consider the BMW G 310 GS recently reviewed here on the ExNotes blog. That’s a 250-class bike made in India that goes for something north of $7K. Consider the Versys 300 Kawi. Same story there by the time you’re done screwing around with the typical dealer’s larcenous setup and freight charges. Yeah, there are other machines out there for less, most notably the CSC motorcycles with the same CG engine (the TT250 and the SG250). The CSC motorcycles are phenomenal motorcycles and their value is off the charts. They don’t have the look and the exclusivity of a Janus, though, and they are not made in America. Is that important? I’d say no, but a lot of people think otherwise to read their Internet forum comments (which they type, of course, on computers made in China).
Think about that for a second. Motorcycles made in America. Yeah, the Janus CG motor is Chinese. What’s your point? Nearly everything else is fabricated and assembled right here. Maybe it’s time for some of the naysayers and keyboard commandos to put their money where their mouths are. It’s not likely the strokesters would ever do that, but maybe it’s time they should. Me? I think what the guys in Goshen are doing is amazing. You have two young guys with a vision and a great team building motorcycles in America. Exquisite motorcycles with style and a unique character. Motorcycles that can take you through Baja and bring you back safely. Motorcycles with a soul. A motorcycle with which you can form a bond. What’s wrong with that?
Want to read the rest of the story? Please visit our Baja page for an index to all of the Janus Baja blog posts!
Back in So Cal on a rainy and cold day, after a Janus ride through Baja. Good times!
Jordan, Devin, and I made it home safe and sound today after four awesome days on the road. I’m beat. It’s been a fun ride. I have much to tell you about the grand time we had on these amazing machines, but I don’t want to do a half-baked job trying to write well when I can barely stay awake. It’s time to invoke the greatest labor saving device ever created…that concept we know as “tomorrow.” Wait for it, folks. It will be good, I promise. Thanks for riding along with us.
Want to read the rest of the story? Please visit our Baja page for an index to all of the Janus Baja blog posts!
The day started early in San Felipe this morning, and that’s a good thing because our hotel, the Costa Azul, has no room heaters. For most of the year I think that’s probably okay, but we are riding through a cold snap and it was chilly last night. It’s all part of the adventure.
Janus Motorcycles in San Felipe!
Our first stop was at the San Felipe sculpted sign along the Malecon, and then it was on to breakfast at the Rice and Beans restaurant. San Felipe is empty this time of year, and the cold snap isn’t helping things. We were the only folks in the restaurant this morning.
After a great breakfast (thanks again, Jordan and Devin) we were on Highway 5 headed north. We encountered the first military checkpoint of the day about 30 miles up the road, where we were inspected by a very young and very heavily armed Mexican infantry soldier who pronounced us good to go, and shortly thereafter it was a quick turn onto Highway 3 for the ride across Baja.
That’s when the fun began. Jordan picked a good spot to use the drone, and he grabbed great footage of Devin and I riding through the desert. Then it was time for Devin to head into the soft stuff, and the digital cameras came out…
Devin putting the Gryffin through its paces in Baja.A Bajaeno at heart, Devin is…Jordan photographing Devin. We had the road to ourselves.Devin and his Halcyon. This is the same motorcycle that Richard, Devin’s business partner, rode across the United States.Jordan and the Halcyon.
We continued our northwest journey across northern Baja, and we rolled into Ensenada sometime in the mid afternoon. While we were on the road, I grabbed some photos of the guys…
Devin, at speed. It was a great ride.Jordan and Devin on their way to Ensenada.One more photo…that’s Devin on the Halcyon on the right, and Jordan on the Gryffin on the left. I’m also on a Gryffin on this ride, and I’m liking it!
We had a great lunch at Veleros (one of my favorite spots), we rode through more Ensenada traffic, and then we were on Mexico Highway 1. That’s the famous Transpeninsular Highway that runs south all the way to Cabo San Lucas. Our direction today was north, though, and at El Sauzal we peeled off and took Highway 3 again (heading northeast this time) to Tecate.
We’re in Tecate tonight, and folks, it’s cold again. More good news: It’s supposed to rain tomorrow. But we’re having a good time. More to follow, my friends. Stay tuned!
Want to read the rest of the story? Please visit our Baja page for an index to all of the Janus Baja blog posts!
Wow, we’re here in San Felipe, we just returned from a great dinner along the malecon, and yep, it’s still cold. I’ll have more photos than text this evening, boys and girls, mostly because I want to get a good night’s sleep. We’re staying in the beautiful Costa Azul Hotel right on the Sea of Cortez, and with that, let me get into a recap of the day’s ride.
One of the funniest things that’s happened on this trip occurred this morning. When we stopped for our Mexican visas at their immigration office, Devin mentioned he was looking forward to great salsa with our dinner.
“I make the best salsa,” the Mexican immigration officer said.
“What time should we be over for dinner?” I asked.
“You can buy my salsa,” he answered, and with that comment he paused in his review of our visas and pulled out a variety of salsas and other condiments. He arranged them neatly on his desk. Devin and I looked at each other, and then we looked at the immigration dude.
“They are very good…” he said.
“I’ll take one of these and one of those,” Devin said. Tourist visas approved, salsa in hand, and we were on our way. I can’t make up stuff this good, folks. That’s Baja for you.
So we were on the bikes, and our first big stop was the Rumarosa Grade. It’s breathtaking. Take a look at the photos we grabbed there on this cold and sunny day…
Devin and Jordan, with the Rumarosa Grade mountains in the background.Jordan’s Gryffin. The colors just flat work. So do the bikes. I am savoring the ride and I am enjoying the motorcycles.I’m riding the charcoal Gryffin in the foreground. The polished aluminum tank is an option.Kids. Whatcha gonna do? That’s Jordan photographing Devin over the Rumarosa Grade. Devin is earning his hazardous duty pay.
We rode east on Highway 2 and as we descended from the Rumarosa Grade, we found what we had been seeking: Warmth. It was still a bit on the cold side (and we’re riding with lots of layered clothing), but it was an escape from the frigid high-altitude air we had been riding through for the last day and a half. The warmer temps felt great.
We took the bypass around Mexicali, and we were soon southbound on Highway 5. That meant a stop for lunch at my favorite open air taco stand, and wow, was it ever good. Devin went back for seconds. It was awesome.
Carne on the chopping block…I give this place 5 stars. It was a great lunch.Jordan’s tacos. They were great.Devin, Round 2.A quesadilla that was extraordinary. Wow, was it ever good!The vanity plate on my motorcycle. I am seriously enjoying this machine!
After our fabulous lunch we rolled across the upper Sea of Cortez plains. It was a glorious ride on a glorious day. Jordan was grabbing video and taking photos. Me? I was just enjoying the ride.
We checked into the hotel and went to dinner. Fish tacos tonight, folks. Hey, I thought this was supposed to be a motorcycle blog! All I’m doing is talking about food!
All right, one more. After dinner, Jordan and Devin stopped at a churro stand. The churros looked good, but I’ve got my figure to think about. I took a pass. That didn’t slow Jordan and Devin down, though!
A San Felipe churro chef. She enjoyed me taking her picture, I think…The Janus Motorcycles Baja churro judges. It’s a tough job, but somebody has to do it. I think they approve.
And folks, that’s a wrap for tonight. Tomorrow we’re riding across the peninsula to Ensenada, we’ll ride along the Pacific for a bit, and then it’s through northern Baja’s wine country.
Stay tuned!
Want to read the rest of the story? Please visit our Baja page for an index to all of the Janus Baja blog posts!
Devin and Jordan with the Janus motorcycles riding into Idyllwild, California. We were at about 6000 feet when I took this photo.
It is bitter cold tonight and it was cold all day. I don’t know who the stronger troopers were today…the motorcycles or the guys from Janus. Think twisties, 200 miles, and temps just above freezing for much of the ride. Throw in breathtaking scenery and exhilarating riding, and you’ll pretty much have it nailed. That’s what our day was like. It was great.
It was cold when we left, and the Janus guys (Devin, one of the founders, and Jordan, their PR guy) had to have been exhausted even at the start of our ride. Their flight to California was delayed last night, and when they got in at 2:00 a.m. this morning, there were no taxis at the airport. It was a mile to the hotel. They hoofed it. With their luggage and their riding gear. Hard core, to be sure. And then, we were on the road at 8:00 a.m. Do the math, folks. These guys are hard chargers.
The Janus Gryffin, a stunning motorcycle.
We climbed about 1500 feet just getting from Ontario to Beaumont on Interstate 10, but that was no problem for the Janus motorcycles and their CG engines. We purred along, we had a Beaumont breakfast in a small Mexican restaurant, and then we hopped on 243 for a twisting climb up to Idyllwild (Idyllwild is a pine-scented mountain village that sits at just over 6,000 ft). Yowsers, was it ever cold! How cold? We had to watch ourselves in the corners that were still in the shade, because the ice hadn’t melted yet. Yep, that’s how cold it was. And we rode through it.
We trekked south on California 371 and 79 to Julian, stopped for lunch (hot tea and chili for me), and continued our adventure south. Today was a twisties extravaganza almost all day. I’ll probably feel the g-forces in my sleep tonight…they were nonstop as we leaned left, leaned right, rolled off and then back on the throttle, and rode on some of the best roads in southernmost California. And yep, we saw that flock of wild turkeys along the 79 (about 150 of them; they were an amazing sight). It’s San Felipe tomorrow via Mexico’s Rumarosa Grade on Highway 2 east out of Tecate, and then on to Highway 5 south for the easy roll through the volcanic fields into San Felipe. It should be a warmer ride, and I can sure use some of that!
You probably want to know: What are the Janus motorcycles like? Here’s my take: They are exquisitely crafted and they are beautiful. Fit and finish rival anything available today (or at any other time). They handle well. The CG engine has a familiar feel to it, and it’s one I like. And to no one’s surprise, the motorcycles drew a crowd wherever we parked them. At breakfast and lunch we parked the bikes where we could see them, and folks could not walk by without stopping and taking photos. It was impressive. A young guy named Dave (who works at a Vespa dealership) chatted us up for several minutes. Dave knew about Janus but these were the first ones he had seen, and he made no bones about his feelings: He was impressed. My thought is that even folks who don’t know anything about motorcycles can instantly see that these bikes are something special.
Fun times, folks. Stay tuned…there’s more good stuff coming your way!
The stars of this show, put away for the evening.
Want to read the rest of the story? Please visit our Baja page for an index to all of the Janus Baja blog posts!
Until I misted the swing arm, for some reason the transition zone between bare metal and original paint bubbled up making a mess out of the thing. I don’t know what the difference was but after trying to remedy the situation four times I gave up, sanded the swing arm and shot it with primer. The black paint laid down nicely after that but so much for keeping it original-ish.
I started on the front brake system and noticed this cool little eccentric bolt that adjusts the free play on the master cylinder. There are so many nice touches like this on the Z1. Kawasaki tried to build the best motorcycle they could. The master cylinder was in good shape. These things are a bear to reassemble but after five tries I managed to get the plunger in the bore along with the c-shaped travel stopper and the snap ring. The only complaint I have against the Z1 Enterprises master cylinder kit is that it didn’t come with the rubber bellows (the part that keeps brake fluid from sloshing in the reservoir) so I’ll have to order that bit.
The metal brake line to the caliper was stuck mightily. I tried heat and penetrating oil and even bought a set of metric line wrenches but in the end it took a vise and brute force to remove the line. It’s not destroyed but I’ll be buying a new metal line along with both flexible hoses and the little bracket that holds the line away from the front fender.
Once apart, the caliper was in excellent condition. I sanded the bore to remove corrosion and the 
The previous owner had the rear axle assembled wrong and my book was illustrated with the spacers reversed so a quick message to Skip Duke and I had the spacer order correct.
The sprocket side gets only the seal spacer while the drum brake side gets the long, necked-down spacer. The thick washer-spacer (that was jammed into the drum brake side) is actually a washer. It spaces the castle nut the correct distance for the cotter pin or hitch pin hole.
The stock swing arm grease nipple would not accept my grease gun fitting resulting in grease all over the place. In this photo you can see the differences. Rather than get the correct tool I tapped the fitting for a standard nipple and screwed the mess together.
I’m not happy with the grease nipple set up although it did allow me to grease the swing arm. I’m going to remove the fitting and have another go at making it look better.
Zed’s rear end is coming along nicely. I think the 4.10X18 tire looks a little puny on the bike so you may get a Smokey burn out video after all. Next tire I get will be a 4.50X18.
