222 Remington – The ExhaustNotes Blog

Cheap Triple Deuce Thrills

The .222 Remington, known as the triple deuce, is an inherently accurate cartridge. I have an old Savage 340 chambered for this cartridge and I’ve written about it before. The Savage was inexpensive and the stock was well worn (it was only $180 from a local shop used gun rack maybe 3 or 4 years ago). I bought it because I never had a triple deuce and I wanted a refinishing project.

..starboard. It looks brand new. It’s at least 50 years old.

The Savage 340 was an economy rifle back in the day. I have a library of old Gun Digest books, and my 1956 Shooter’s Bible shows that it sold for $62.

The refinish, with TruOil, turned out well.

Mine is a 340D. I think that means it was the Deluxe model.

Note the cantilevered Weaver mount and the Bushnell 3×9 Banner (an el cheapo model if ever there was one) were included with the rifles’ $180 price at Turner’s.

The detachable box magazine. The bluing is in excellent original condition on this rifle.

I recently bought an 8-pound bottle of XBR 8208 propellant (these days, you buy what’s available), and I wanted to see where the accuracy was with this propellant and 55-grain full metal jacket boat tail Hornady bullets. I use these bullets in my Mini 14, and I was pretty sure they would do well in the .222 Savage, too.

The accuracy load for the Savage is 23.4 grains of XBR 8208. Not bad for $180, a little elbow grease, a little TruOil, and an hour on the range at 100 yards.

For a pencil weight barrel and a really screwy bedding approach, the Savage did very well.

The rifle could do better. The stock has a lot of drop at the heel and it is designed for the iron sights on the rifle. And that would be okay, but the Savage has a scope on it and I wanted to play with it. It’s difficult to get a consistent cheek weld because of the scope’s height and the stock’s drop (I’m shooting with my chin almost on the stock). I may cast about for one of those leather cheek pads that lace onto a rifle, or I may leave it as is.

This lightweight and accurate rifle would be a hoot chasing jackrabbits in west Texas, which is what I spent a lot of my earlier years doing. Maybe someday I’ll go back.

About those other links…here’s the series on refinishing the Savage:

Refinishing Savage: Part 1
Refinishing Savage: Part 2
Refinishing Savage: Part 3
Refinishing Savage: Part 4

And here’s the blog about my first day on the range with this rifle!

More Tales of the Gun!

Never miss an ExNotes blog…subscribe for free!

Gunstock Refinish: Part IV

This blog will wrap up the series on refinishing the Savage 340 rifle. It’s been quite an adventure and the Savage is quite the rifle. As you may recall, I found this rifle on the consignment rack at a local gun store, and to my great amazement, my little $180-dollar econo gun turned out to be quite the tack driver. I purchased the rifle with a refinishing project in mind, and now it’s complete.

The Refinished Savage

I stopped after eight coats of TruOil, as the results were the same after the sixth and seventh coats. The Savage went back to together in minutes, and it looks like a new rifle. Actually, that’s not quite right…the 340 Savages that left the factory never looked this good..

Here are a few shots from the right side…

And a few from the left…

Before and After Comparisons

Here are a few before and after shots to allow a more direct comparison…

The original finish had a lot of scratches and dings; those are all gone. The 340 originally had white line spacers between the buttplate and the stock, and between the pistol grip cap and the stock. I like the “less is more” look (I think it’s more elegant), and I think I achieved it by deleting the spacers. The rifle’s original finish was some sort of shellac or varnish that gave a reddish hue to the stock; the new TruOil finish allows the natural walnut color to emerge and I like that better.

Oil Finish Advantages

There are other advantages besides just good looks to an oil finish. When the stock gets scratched or worn (and if it’s used in the field, it will), it’s a simple matter to just reapply the TruOil again. When you do that, the stock will be like new again. It’s easy to touch up an oil finish. Another advantage is that the stock is sealed. The oil finish is relatively impervious to moisture, and that keeps the stock stable. It won’t induce a shift in bullet impact as a result of the stock absorbing moisture and distorting. And of course, there’s that most basic advantage: It just flat looks good.

If you would like to see how this project began and read a bit about the Savage’s accuracy, you can do so here.

A Savagely Inexpensive Rifle
Savage Refinish Part I
Savage Refinish Part II
Savage Refinish Part III

Gunstock Refinish: Part III

In our previous blogs, we removed the Savage 340 barreled action from the stock, we stripped the old finish and made a few minor wood repairs, and we sanded the stock to a smooth finish with successively finer sandpaper. We’re now ready to get to the fun part, and that’s applying the TruOil for a rich, deep, and elegant finish.

TruOil Application

Applying the TruOil to the stock takes several days because it involves repeated applications and drying cycles. There are basically two ways to go here. We can create a deep gloss finish, or we can create a subdued satin finish. I like both, and as of this writing, I haven’t decided what the final look is going to be.

You’ll recall that I omitted the white line spacers between the stock and the buttplate and between the pistol grip cap and the buttplate because I like the look better without the spacers.

I always c-clamp a rod to my bench because that’s where I’ll hang the stock after each TruOil coat to allow it to dry. You can see that in the photo to the right.

The way I like to do this is I cut out a small square of old T-shirt for the TruOil applicator. I’ll put a small bit of TruOil on the cloth and rub that into the stock, and then hang the stock to allow it to dry.

On this particular piece of walnut, I noticed that the walnut pores were large in a few areas, so I put on two coats over the space of a couple of days to see how they filled. I didn’t like the way the pores looked (they were not filling) after the second coat. That’s okay; we have an app for that. It involves applying a thick coat of TruOil and giving it several days to cure. That worked for me because I was going to be out of town for several days (another secret mission, you could say), and that would give the third coat plenty of time to thoroughly cure.

Some folks like to use a wood filler to fill the pores. I’m not one of them. I like to let the TruOil do all the work. I think it looks better than using a filler.

After the third, thick TruOil coat cured, I then went to work on the stock with 0000 steel wool. The idea here is remove all of the excess TruOil from that third, thick coat, and get a uniform surface with no open pores. That worked out well, and I had a nice subdued stock finish that already looked way better than the original finish. I could have stopped at that point and reassembled the rifle, but I decided to go for a deeper finish. More TruOil coming up, folks.

I applied a thin fourth coat of TruOil and allowed it to cure overnight. The stock started to look very good, and I next applied a fifth thin coat. It’s what’s curing now, and it’s what you see in these photos. The drill is to go very, very light with each coat, rubbing it into the walnut with the cloth applicator. You want to get the wood wet, but just barely. If you get it too wet, the TruOil will run (and then you have to rub it down with steel wool after it cures and start all over). I’m going to do this a few more times, and I’ll decide on the total number of TruOil applications based on how the stock looks after I apply each coat. As I mentioned above, I may leave the high gloss finish as is, or I may opt to break the shine with 0000 steel wool and have a subdued satin finish. We’ll see.

Read more of our Tales of the Gun stories here, and don’t forget to sign up for our automatic email blog notifications!

Did you miss the earlier blogs on this Savagely inexpensive, tack-driving Savage 340? You can see them here, here, and here.

Gunstock Refinish: Part II

I told you a bit about my 222 Savage 340 in an earlier blog, and I described removing the barreled action from the stock for a refinishing project. This is the second installment of that project, in which I remove the old finish and prep the stock for refinishing.

Stripping

At this point, all that’s left is the walnut stock, and that means it’s time to remove the old finish. The last time I did this I used an spray that took the finish off almost immediately, and it required only one application. This new stuff is supposed to be better for the environment, and the spray can said it might take a couple of applications to get all of the old finish off. The instructions also said to wait 3 hours after applying it. It did take three applications to get all of the old finish off. Somewhere a tree hugger is thankful, I guess, but it meant that with the wait times after each application this task was spread over 2 days. The way I used it was I sprayed the stuff on, I waited the three hours, and then I wiped the gooey finish remnants off with a towel. I wore disposable rubber gloves and wiped the stock down with an old terry cloth towel.

The stripper. I’m hoping the search engines see that term and we get lots of hits. You know. The stripper.

Oil Extraction

After that, I went to work with a heat gun on the stock. That sweated out the whatever oils were left in the wood, and then it was time to start the stock repairs and the sanding.

Undinging

There were a couple of depressions in the stock (not chips, but slight depressions where the wood had been compressed). That called for the old wet washcloth and iron trick. The drill here is to lay a wet washcloth over the dings in the stock, and then apply the hot iron to the washcloth directly over the dings. The resulting steam is forced into the wood and it lifts the dents. It works well because the wood wants to return to its uncompressed state and the steam helps it do so.

Butt and Cap Alignment

After that, I reinstalled the butt plate and the pistol grip cap, but without the white line spacers. The white line spacer thing was a popular look in the ‘50s and 60’s, but I don’t care for it. I like the look of a black buttplate and pistol grip cap directly against the walnut. There was a bit of mismatch between these plastic parts and the stock, but that’s okay, too. It will be addressed in the next step.

Sanding

You might think the walnut would be smooth because it was already smooth before the original finish was applied several decades ago, but that’s usually not the case in a project like this. Stripping the finish raises the grain a bit, and truth be told, original finishes from the factory are usually not so good, anyway. And, as hinted at in the preceding paragraph, sanding will assure a perfect match between the walnut stock and the butt plate and pistol grip cap. I start with 220 grit sand paper, then 320 grit, then 400 grit, and finally, 600 grit. Again, patience is a friend here. I worked to get the match I wanted between the stock and the black plastic parts, and I wanted a smooth surface all over the stock. I always sand with a block to support the sandpaper, and I’m careful not to round any edges where crisp edges are desired (like along the top of fore end).

All of the above took a little more than 3 days, and at the end of this phase of the project, I had a pristine stock with a perfectly matched buttplate and pistol grip cap. It was ready for the next step, and that’s the start of the TruOil applications for a rich, subdued, and elegant oil finish. That’s coming up in the next blog on this project.

Read more of our Tales of the Gun stories here, and don’t forget to sign up for our automatic email blog notifications!

Did you miss the earlier blogs on this Savagely inexpensive, tack-driving Savage 340? You can see them here and here!

A Savagely-inexpensive rifle…

My new-to-me Savage 340 in .222. It’s got a scope and the whole shebang set me back $180. Such a deal!

I’m a rifle enthusiast, I can’t pass on an interesting experience, and I’m cheap. So when I was in a local gunshop a year or so ago, I was surprised and intrigued to see a consignment rifle go on the rack at a ridiculously low price. It was a 50-year-old Savage 340 bolt action rifle in .222 Remington (complete with a period-correct 3×9 telescopic sight) for only $180.

A Bushnell 3×9 scope was included with the deal!

This is a rifle that probably sold new for around $35 or $40, but like I said, that was 50 years ago. These days, any kind of a shooter for $180 is a steal. I was immediately attracted to the Savage by the price and the thought that it might make for a nice gunstock refinishing project. What really got my attention, though, was the cartridge for which it was chambered: The .222 Remington.

I’ve never owned a gun chambered in .222 Remington. The Triple Deuce is a cartridge that has a cult following because it is one of those special numbers known to be inherently accurate. It’s very similar to the .223 Remington (the 5.56 NATO round), but the .222 is a little bit shorter with a longer case neck. It’s proportions are said to be ideal for phenomenal accuracy. Like I said, I’ve never had a .222, but for $180, I could afford to find out if the stories were true.

Okay, on to Step 2 of this saga, and that’s the reloading aspect. Accuracy can be greatly enhanced by reloading. You know, that’s the deal where you save the fired brass, resize it in a reloading press, punch out the old primer, insert a new primer, load a precisely-controlled amount of new gunpowder, and seat a new bullet. Oilà…you have a reloaded round ready for firing. The deal with reloading is that you can experiment with different powders, different powder weights, different primers, different brass manufacturers, different bullet makers, different bullet weights, different bullet seating depths, and more. The concept is that you can tune the ammunition to precisely match a rifle’s preferences and achieve improved accuracy. I’ve been reloading ammo for close to 50 years and I’m here to tell you it works.

Now, back to that Savage rifle. I waited my obligatory 10 days (the Peoples Republik of Kalifornia’s “kooling off” period) and in Governor Gavin’s eyes I guess had cooled off sufficiently. I picked up my new-to-me, 50-year-old Savage and loaded several different combos to see how the old 340 would work. In a word, it was awesome…

Impressive results for the first time out with a 50-year-old rifle. These groups were fired at 50 yards; the next steps will involve experimenting around the best load and testing for accuracy at 100 yards. The recipe for the tiniest loads was a 55-grain Hornady full metal jacket boat tail bullet, a cartridge overall length of 2.176 inches, and 22.6 grains of IMR 4064 propellant.

You can see that different loads do indeed result in different accuracy levels. This is encouraging stuff, and what makes it even more promising is it shows the results of just one reloading session. The load that printed a 0.538-inch group is clearly pointing toward what the Savage likes, and my next set of loads will refine that combination. Good stuff and great fun, and all with a rifle that only cost $180!

Check out our other Tales of the Gun stories here!