Quite a Week…

By Joe Berk

As the title implies, last week was quite a week, and a lot of it focused on Moto Guzzi stuff.  The Roman gods are sending me a message, I think, but old age and big bucks will most likely keep my desire to own a vintage Guzzi suppressed.  And there’s been some pocketknife stuff, too, leading into the age-old Chinese quality discussion.  I’ll get to that in a minute.

I spent Monday morning at Cycle Garden in Indio, California, getting tutored by good buddy Steve on the finer points of Guzzi fork rebuilding.  It’s for a piece I’m doing on that topic, and the folks at Cycle Garden couldn’t have been more welcoming.  These guys know their stuff, as well they should: They are the largest, busiest, and probably the best in the world at concours-level Guzzi restorations.  I developed a bad case of the “I wants” for a restored Guzzi after seeing some of the bikes at the top of this blog, but it’s probably not in the cards.

After treating me to a cup of his famous home-roasted and ground coffee, Steve showed some of the bikes to me.  There’s not a single part on a Cycle Gardens restoration Guzzi that isn’t touched during the restoration (both 0n the motorcycle and in the engine).   How much?  Somewhere in the neighborhood of $40,000 to $50,000.  A look at any of the Cycle Garden bikes easily confirms the value is there.  But my wallet is light enough already.  Watch for more on the Cycle Garden shop; it’s amazing.

On Friday, I visited another Guzzi shop 130 miles to the west, this time to meet with and interview Chris Donaldson.  Chris wrote Going the Wrong Way, the story of his ride around the world on a Moto Guzzi.  He just flew into Los Angeles from Ireland to ride across the US.  We had a nice meeting, and you’ll be hearing more about Chris in a subsequent blog.

One the pocketknife front, it’s been mostly good (and the good will be featured in upcoming blogs) with several new additions to the collection.  But there’s been a couple of bad apples, and that’s increased my smarts about what to look for in a pocketknife.

The first was a large Buck-110-style Schrade folding hunter with stunning stag grips.  The knife arrived and I loved the look of it, but it had a defect.  With the blade closed, it wobbled inside the knife body.  In my opinion, it should have no side-to-side play, so back it went.  I don’t want my money back; I just want a good knife.  We’ll see what happens.

The next was another beautiful large hunter, this time from Rough Rider. It’s a beautiful knife, but it arrived with a different problem.  On this one, when the knife is closed the tip of the blade sits slightly proud of the knife body, and that means you can catch your hand on it.   Who would think to check for this?  Apparently, not the folks who manufacture the knife, and not the folks who sell them, either.  I bought one from Amazon, and I returned it the next day.  I wanted the knife, though, so I ordered it again from Chicago Knife Works.  Wouldn’t you know it?  The replacement knife had the same problem. Size notwithstanding, it’s an inexpensive knife, but apparently they’re all bad (at least based on my sample of two).

I tried grinding down the Rough Rider’s kick (the part of the blade that controls how far it goes into the knife body when it closes), but that didn’t fix the problem.  It’s an inexpensive knife (only about $15) and I’m not going to bother returning it.  I’ll just look at it from time to time.  It will remind me that I’m not as smart as I sometimes think I am.

Stay tuned, my friends.  There’s more coming your way.

---

Join our Facebook ExNotes page!

---

Never miss an ExNotes blog:

---

Help us keep the lights on:

---

Don’t forget: Visit our advertisers!

---