snubbie – The ExhaustNotes Blog

There’s a Facebook group called Snub Noir and I enjoy it. They have a lot of good info there about concealable revolvers, and it projects kind of a ’40s/’50s/’60s vibe having to do with private investigators and police officers (and movies, TV shows, and novels from that era). It’s centered on the Colt and Smith snubbies of the day, and on today’s snubbies, too. If you’re into snub nosed revolvers, you’ll like this place. If you visit it, you’ll understand the Gats and Hats thing.

That beautiful S&W Model 60 you see in the big photo above is my personal carry gun and it’s a sweet piece. It’s been selectively polished, it has Altamont grips, and it has a TJ action job (you can read more about TJ’s work on his website and I’ll give you a few more links on my Model 60 at the end of this blog). I’ve done a fair amount of load testing with the Model 60 and I know the loads it likes from accuracy and shoot-to-point-of-aim perspectives. The best load is the FBI load, which is a 158-grain bullet over 3.5 grains of Winchester 231 propellant.

Five rounds of .38 Special, with a 158-grain flatpoint cast bullet and 3.5 grains of Winchester 231. It’s a great load. You can read about it in the links provided at the end of this blog.

I wanted to try something different, though. I’ve shot the Model 60 at 50 feet, 25 yards, 50 yards, and 100 yards. I know, I know: Those latter two distances are not really what the snub nose revolver designers had in mind when they designed these guns. But I was curious when I did those tests. I know a retired police officer who can hit a clay target at 50 yards (the kind you dust in trap or skeet shooting).

The police sometimes qualify at 7 yards, and I think that’s more in line with what a snubbie is intended to do. And, you know, there’s this zombie apocalypse thing that’s coming down the road. I’ve done my homework, and I know that most zombie hostage incidents (i.e., where a zombie is holding a damsel in distress) occur at 7 yards. I wondered: How would I do firing my Gat double-action as quickly as I could at 7 yards? I want to be prepared, you know.

Five rounds is all the Model 60 holds. It sure is slender and it conceals well.

Fortunately for me, zombie-holding-hostages targets are readily available on Amazon, so I grabbed a couple and headed to the range to test my hostage rescue skills with two different loads. The first was the old bullseye target competition .38 Special standard: A 148-grain wadcutter (in this case, copper-plated wadcutters from Xtreme Bullets) over 2.7 grains of Bullseye propellant. It’s the load I’m set up to produce in large quantities on my Star reloader, and it’s the load you see in the top photo (the Dr. Seussian Gat in the Hat pic). The other is the FBI load mentioned above: A 158-grain bullet and 3.5 grains of Winchester 231 secret sauce.

So how’d I’d do? The short answer is not too bad. Not as good as I thought I would, but good enough and certainly close enough for government zombie work. The first target (the one immediately below) shows the results of six full cylinders (30 rounds, as the Model 60 holds five rounds). The good news is 29 of those shots went directly into the zombie’s noggin and none hit Betty (the hostage).

Betty and her zombie captor. He’s toast. Note the one round that tumbled just above Betty’s head. These were low-velocity wadcutter loads.

The bad news? One of the wadcutter bullets tumbled. Fortunately for Betty it went right over her head. You can see the bullet’s outline in the target above. It might have been that the Star threw a light load on that round, or maybe a case split and let too much pressure escape, or maybe these light target loads are marginal in the Model 60’s short 2-inch barrel. Win some, lose some. Betty’s okay, though…that’s the important thing.

Not surprisingly, the FBI load did much better (old J. Edgar know what he was doing against both zombies and commies, I think). The 30 holes you see in Mr. Zombie below went into a tighter group, none of the bullets tumbled, and most importantly, none of them went into Betty.

Betty liked the FBI load better. So did I. The zombie offered no opinion.

I feel better now. I know if I can keep my wits about me and I have my Model 60, and if I can get the zombie to pose with Betty like you see above at 7 yards, he’s toast and Betty’s going to be just fine. For any zombies who follow the ExNotes blog: You’ve been warned.

Never miss an ExNotes blog…sign up for free:

As this blog’s title states, this blog is Gats and Hats I. Will there be a Gats and Hats II? Stay tuned, my friends. Two more days, and we’re calling in the heavy artillery.

More gun stories? Hey, it’s what we live for!

Want to know more about the Model 60 featured in this blog? It’s all in the links below:

Getting hammered, and the effects of incomplete primer seating.

I had trouble selecting a title for this blog. The other contender was 50 Shades of Gray to go with the big photo you see above. I wish I could say I took that photo, but the credit goes to good buddy and master gunsmith TJ. TJ is the best pistolsmith there is, and one of the things that makes working with him so enjoyable is his photography. When TJ works a custom gun project, he photodocuments it to keep you appraised of what’s going on, and a couple of the photos you see here are the ones he sent to me on my Model 60 project. But I’m getting ahead of myself. Let me back up a bit.

If you follow the blog (and you all do, right?), you’ve been watching the Star reloader resurrection project I’m working. That’s coming along nicely, and I’m already making .38 Special ammo on my resurrected reloader. This story started with my noticing an ad in my gun club newsletter for a Model 60 at a killer price. I’m normally not a snubnose kind of guy, but hey, a deal’s a deal and I like the idea of a snubnose .38. Maybe I watched too many cop shows in the ’50s and ’60s. You know. Cannon, Kojak, Hawaii 5-0, 77 Sunset Strip, Dragnet…you get the idea. All those guys carried snubbies.

Anyway, the Model 60 was a good deal, but swinging the cylinder out to the side was a bit dicey…sometimes it wanted to stick. The seller told me about that but I didn’t see it as a problem. I saw it as an opportunity to do another project with good buddy TJ, and that’s what I’m doing. TJ is doing his Level 1 action job for me (polishing all the internals and lightening both the double and single action trigger pulls), and I’m having him also put a mirror finish on the cylinder, the ejector rod, the cylinder release, the trigger, and the hammer. It will make for a nice, subtle contrast with the brushed stainless finish on the rest of the gun. That leaves only the grips, and I’m doing something about those, too. TJ put into words what I was thinking, and that was that the stock grips (the ones you see above) are butt ugly (pardon the gun pun).

Back in the day Smith used to offer uncheckered rosewood grips, and that’s what I really wanted. They don’t sell those any more, though, and I mentioned to TJ that I should have bought a set back in the ’70s. You know, just in case. “Try E-Bay,” TJ said, and I did. I hit paydirt almost immediately, and the grips you see below are on their way to me now. Rosewood. Smooth. Just what I wanted.

The finish on my inbound grips may be a little funky, but that’s another opportunity, too. It’s TruOil time, folks. TruOil and a little patience will have these grips looking literally better than they did when they left the S&W factory in Springfield.

The Star reloader is operational now (I’ll show you more on the Star resurrection in upcoming blogs, and I’ll include a video that shows it making finished ammo). I’ll have the Model 60 back in a few days, so I went ahead and loaded a box of ammo with the outstandingly accurate 158-grain cast bullets I get from my good buddy Roy. It took only a few minutes on the Star (it would take closer to an hour on a single-stage press). For a machine that’s probably older than I am, the Star sure does a good job.

When I take my custom snubbie .38 to the range, I’ll grab a few photos and share a range report with you here on the ExNotes blog. Stay tuned, my friends, and keep your powder dry.

More Tales of the Gun!

Enter your email address for a free subscription to ExNotes!